substr_count

    (PHP 4, PHP 5, PHP 7, PHP 8)

    substr_count — Возвращает число вхождений подстроки

    Описание

    substr_count(
        string $haystack,
        string $needle,
        int $offset = 0,
        ?int $length = null
    ): int

    substr_count() возвращает число вхождений подстроки needle в строку haystack. Заметьте, что параметр needle чувствителен к регистру.

    Замечание:

    Эта функция не подсчитывает перекрывающиеся подстроки. Смотрите пример ниже!

    Список параметров

    haystack

    Строка, в которой ведётся поиск

    needle

    Искомая подстрока

    offset

    Смещение начала отсчёта. Если задано отрицательное значение, отсчёт позиции будет произведён с конца строки.

    length

    Максимальная длина строки, в которой будет производится поиск подстроки после указанного смещения. Если сумма смещения и максимальной длины будет больше длины haystack, то будет выведено предупреждение. Отрицательное значение будет отсчитываться с конца haystack.

    Возвращаемые значения

    Эта функция возвращает целое число (int).

    Список изменений

    Версия Описание
    8.0.0 length теперь допускает значение null.
    7.1.0 Добавлена поддержка отрицательных значений offset и length. length теперь также может быть 0.

    Примеры

    Пример #1 Пример использования substr_count()

    <?php
    $text     = 'This is a test';
    echo     strlen($text); // 14

    echo substr_count($text, 'is'); // 2

    // строка уменьшается до 's is a test', поэтому вывод будет 1
    echo substr_count($text, 'is', 3);

    // текст уменьшается до 's i', поэтому вывод будет 0
    echo substr_count($text, 'is', 3, 3);

    // генерирует предупреждение, так как 5+10 > 14
    echo substr_count($text, 'is', 5, 10);


    // выводит только 1, т.к. перекрывающиеся подстроки не учитываются
    $text2 = 'gcdgcdgcd';
    echo     substr_count($text2, 'gcdgcd');
    ?>

    Смотрите также

    • count_chars() - Возвращает информацию о символах, которые входят в строку
    • strpos() - Находит позицию первого вхождения подстроки
    • substr() - Возвращает подстроку
    • strstr() - Находит первое вхождение подстроки

    Улучшение страницы

    Инструкция • Исправление • Сообщение об ошибке
    ＋Добавить

    Примечания пользователей 7 notes

    up
    58
    tuxedobob
    8 years ago
    It's worth noting this function is surprisingly fast. I first ran it against a ~500KB string on our web server. It found 6 occurrences of the needle I was looking for in 0.0000 seconds. Yes, it ran faster than microtime() could measure.

    Looking to give it a challenge, I then ran it on a Mac laptop from 2010 against a 120.5MB string. For one test needle, it found 2385 occurrences in 0.0266 seconds. Another test needs found 290 occurrences in 0.114 seconds.

    Long story short, if you're wondering whether this function is slowing down your script, the answer is probably not.
    up
    12
    flobi at flobi dot com
    18 years ago
    Making this case insensitive is easy for anyone who needs this. Simply convert the haystack and the needle to the same case (upper or lower).

    substr_count(strtoupper($haystack), strtoupper($needle))
    up
    3
    tweston at bangordailynews dot com
    9 years ago
    To account for the case that jrhodes has pointed out, we can change the line to:

    substr_count ( implode( ',', $haystackArray ), $needle );

    This way:

    array (
    0 => "mystringth",
    1 => "atislong"
    );

    Becomes

    mystringth,atislong

    Which brings the count for $needle = "that" to 0 again.
    up
    -1
    jrhodes at roket-enterprises dot com
    15 years ago
    It was suggested to use

    substr_count ( implode( $haystackArray ), $needle );

    instead of the function described previously, however this has one flaw. For example this array:

    array (
    0 => "mystringth",
    1 => "atislong"
    );

    If you are counting "that", the implode version will return 1, but the function previously described will return 0.
    up
    -1
    info at fat-fish dot co dot il
    17 years ago
    a simple version for an array needle (multiply sub-strings):
    <?php

    function substr_count_array( $haystack, $needle ) {
    $count = 0;
    foreach (    $needle as $substring) {
    $count += substr_count( $haystack, $substring);
    }
    return     $count;
    }
    ?>
    up
    -1
    XinfoX X at X XkarlX X-X XphilippX X dot X XdeX
    20 years ago
    Yet another reference to the "cgcgcgcgcgcgc" example posted by "chris at pecoraro dot net":

    Your request can be fulfilled with the Perl compatible regular expressions and their lookahead and lookbehind features.

    The example

    $number_of_full_pattern = preg_match_all('/(cgc)/', "cgcgcgcgcgcgcg", $chunks);

    works like the substr_count function. The variable $number_of_full_pattern has the value 3, because the default behavior of Perl compatible regular expressions is to consume the characters of the string subject that were matched by the (sub)pattern. That is, the pointer will be moved to the end of the matched substring.
    But we can use the lookahead feature that disables the moving of the pointer:

    $number_of_full_pattern = preg_match_all('/(cg(?=c))/', "cgcgcgcgcgcgcg", $chunks);

    In this case the variable $number_of_full_pattern has the value 6.
    Firstly a string "cg" will be matched and the pointer will be moved to the end of this string. Then the regular expression looks ahead whether a 'c' can be matched. Despite of the occurence of the character 'c' the pointer is not moved.
    up
    -5
    php at blink dot at
    10 years ago
    This will handle a string where it is unknown if comma or period are used as thousand or decimal separator. Only exception where this leads to a conflict is when there is only a single comma or period and 3 possible decimals (123.456 or 123,456). An optional parameter is passed to handle this case (assume thousands, assume decimal, decimal when period, decimal when comma). It assumes an input string in any of the formats listed below.

    function toFloat($pString, $seperatorOnConflict="f")
    {
    $decSeperator=".";
    $thSeperator="";

    $pString=str_replace(" ", $thSeperator, $pString);

    $firstPeriod=strpos($pString, ".");
    $firstComma=strpos($pString, ",");
    if($firstPeriod!==FALSE && $firstComma!==FALSE) {
    if($firstPeriod<$firstComma) {
    $pString=str_replace(".", $thSeperator, $pString);
    $pString=str_replace(",", $decSeperator, $pString);
    }
    else {
    $pString=str_replace(",", $thSeperator, $pString);
    }
    }
    else if($firstPeriod!==FALSE || $firstComma!==FALSE) {
    $seperator=$firstPeriod!==FALSE?".":",";
    if(substr_count($pString, $seperator)==1) {
    $lastPeriodOrComma=strpos($pString, $seperator);
    if($lastPeriodOrComma==(strlen($pString)-4) && ($seperatorOnConflict!=$seperator && $seperatorOnConflict!="f")) {
    $pString=str_replace($seperator, $thSeperator, $pString);
    }
    else {
    $pString=str_replace($seperator, $decSeperator, $pString);
    }
    }
    else {
    $pString=str_replace($seperator, $thSeperator, $pString);
    }
    }
    return(float)$pString;
    }

    function testFloatParsing() {
    $floatvals = array(
    "22 000",
    "22,000",
    "22.000",
    "123 456",
    "123,456",
    "123.456",
    "22 000,76",
    "22.000,76",
    "22,000.76",
    "22000.76",
    "22000,76",
    "1.022.000,76",
    "1,022,000.76",
    "1,000,000",
    "1.000.000",
    "1022000.76",
    "1022000,76",
    "1022000",
    "0.76",
    "0,76",
    "0.00",
    "0,00",
    "1.00",
    "1,00",
    "-22 000,76",
    "-22.000,76",
    "-22,000.76",
    "-22 000",
    "-22,000",
    "-22.000",
    "-22000.76",
    "-22000,76",
    "-1.022.000,76",
    "-1,022,000.76",
    "-1,000,000",
    "-1.000.000",
    "-1022000.76",
    "-1022000,76",
    "-1022000",
    "-0.76",
    "-0,76",
    "-0.00",
    "-0,00",
    "-1.00",
    "-1,00"
    );

    echo "<table>
    <tr>
    <th>String</th>
    <th>thousands</th>
    <th>fraction</th>
    <th>dec. if period</th>
    <th>dec. if comma</th>
    </tr>";

    foreach ($floatvals as $fval) {
    echo "<tr>";
    echo "<td>" . (string) $fval . "</td>";

    echo "<td>" . (float) toFloat($fval, "") . "</td>";
    echo "<td>" . (float) toFloat($fval, "f") . "</td>";
    echo "<td>" . (float) toFloat($fval, ".") . "</td>";
    echo "<td>" . (float) toFloat($fval, ",") . "</td>";
    echo "</tr>";
    }
    echo "</table>";
    }
    ＋Добавить
    To Top