PHP 8.4.1 Released!

    levenshtein

    (PHP 4 >= 4.0.1, PHP 5, PHP 7, PHP 8)

    levenshtein — Calcule la distance Levenshtein entre deux chaînes

    Description

    levenshtein(
        string $string1,
        string $string2,
        int $insertion_cost = 1,
        int $replacement_cost = 1,
        int $deletion_cost = 1
    ): int

    La distance Levenshtein est définie comme le nombre minimal de caractères qu'il faut remplacer, insérer ou supprimer pour transformer la chaîne string1 en string2. La complexité de l'algorithme est en O(m*n), où n et m sont les tailles respectives de string1 et string2 : c'est plutôt bien, en comparaison de similar_text(), qui est en O(max(n,m)**3), mais cela reste très coûteux.

    Si insertion_cost, replacement_cost et/oru deletion_cost sont différent de 1, l'algorithme s'adapte pour choisir la transformation la moins coûteuse. E.g. si $insertion_cost + $deletion_cost < $replacement_cost, Aucun remplacement ne sera effectué, mais plutôt des insertions et suppressions.

    Liste de paramètres

    string1

    Une des chaînes à évaluer.

    string2

    Une des chaînes à évaluer.

    insertion_cost

    Définit le coût de l'insertion.

    replacement_cost

    Définit le coût du remplacement.

    deletion_cost

    Définit le coût de l'effacement.

    Valeurs de retour

    Cette fonction retourne la distance Levenshtein entre deux chaînes de caractères.

    Historique

    Version Description
    8.0.0 Antérieur à cette version, levenshtein() devait être appelée avec soit deux soit cinq arguments.
    8.0.0 Antérieur à cette version, levenshtein() retournait -1 si l'une des chaînes d'arguments dépassait 255 caractères.

    Exemples

    Exemple #1 Exemple avec levenshtein()

    <?php
    // mot mal orthographié
    $input = 'carrrot';

    // tableau de mots à vérifier
    $words = array('apple','pineapple','banana','orange',
    'radish','carrot','pea','bean','potato');

    // aucune distance de trouvée pour le moment
    $shortest = -1;

    // boucle sur les mots pour trouver le plus près
    foreach ($words as $word) {

    // calcule la distance avec le mot mis en entrée,
    // et le mot courant
    $lev = levenshtein($input, $word);

    // cherche une correspondance exacte
    if ($lev == 0) {

    // le mot le plus près est celui-ci (correspondance exacte)
    $closest = $word;
    $shortest = 0;

    // on sort de la boucle ; nous avons trouvé une correspondance exacte
    break;
    }

    // Si la distance est plus petite que la prochaine distance trouvée
    // OU, si le prochain mot le plus près n'a pas encore été trouvé
    if ($lev <= $shortest || $shortest < 0) {
    // définition du mot le plus près ainsi que la distance
    $closest = $word;
    $shortest = $lev;
    }
    }

    echo     "Mot entré : $input\n";
    if (    $shortest == 0) {
    echo     "Correspondance exacte trouvée : $closest\n";
    } else {
    echo     "Vous voulez dire : $closest ?\n";
    }

    ?>

    L'exemple ci-dessus va afficher :

    Mot entré : carrrot
Vous voulez dire : carrot ?

    Voir aussi

    Improve This Page

    Learn How To Improve This Page • Submit a Pull Request • Report a Bug
    ＋add a note

    User Contributed Notes 27 notes

    up
    82
    luciole75w at no dot spam dot gmail dot com
    11 years ago
    The levenshtein function processes each byte of the input string individually. Then for multibyte encodings, such as UTF-8, it may give misleading results.

    Example with a french accented word :
    - levenshtein('notre', 'votre') = 1
    - levenshtein('notre', 'nôtre') = 2 (huh ?!)

    You can easily find a multibyte compliant PHP implementation of the levenshtein function but it will be of course much slower than the C implementation.

    Another option is to convert the strings to a single-byte (lossless) encoding so that they can feed the fast core levenshtein function.

    Here is the conversion function I used with a search engine storing UTF-8 strings, and a quick benchmark. I hope it will help.

    <?php
    // Convert an UTF-8 encoded string to a single-byte string suitable for
    // functions such as levenshtein.
    //
    // The function simply uses (and updates) a tailored dynamic encoding
    // (in/out map parameter) where non-ascii characters are remapped to
    // the range [128-255] in order of appearance.
    //
    // Thus it supports up to 128 different multibyte code points max over
    // the whole set of strings sharing this encoding.
    //
    function utf8_to_extended_ascii($str, &$map)
    {
    // find all multibyte characters (cf. utf-8 encoding specs)
    $matches = array();
    if (!    preg_match_all('/[\xC0-\xF7][\x80-\xBF]+/', $str, $matches))
    return     $str; // plain ascii string

    // update the encoding map with the characters not already met
    foreach ($matches[0] as $mbc)
    if (!isset(    $map[$mbc]))
    $map[$mbc] = chr(128 + count($map));

    // finally remap non-ascii characters
    return strtr($str, $map);
    }

    // Didactic example showing the usage of the previous conversion function but,
    // for better performance, in a real application with a single input string
    // matched against many strings from a database, you will probably want to
    // pre-encode the input only once.
    //
    function levenshtein_utf8($s1, $s2)
    {
    $charMap = array();
    $s1 = utf8_to_extended_ascii($s1, $charMap);
    $s2 = utf8_to_extended_ascii($s2, $charMap);

    return     levenshtein($s1, $s2);
    }
    ?>

    Results (for about 6000 calls)
    - reference time core C function (single-byte) : 30 ms
    - utf8 to ext-ascii conversion + core function : 90 ms
    - full php implementation : 3000 ms
    up
    22
    paulrowe at iname dot com
    16 years ago
    [EDITOR'S NOTE: original post and 2 corrections combined into 1 -- mgf]

    Here is an implementation of the Levenshtein Distance calculation that only uses a one-dimensional array and doesn't have a limit to the string length. This implementation was inspired by maze generation algorithms that also use only one-dimensional arrays.

    I have tested this function with two 532-character strings and it completed in 0.6-0.8 seconds.

    <?php
    /*
    * This function starts out with several checks in an attempt to save time.
    * 1. The shorter string is always used as the "right-hand" string (as the size of the array is based on its length).
    * 2. If the left string is empty, the length of the right is returned.
    * 3. If the right string is empty, the length of the left is returned.
    * 4. If the strings are equal, a zero-distance is returned.
    * 5. If the left string is contained within the right string, the difference in length is returned.
    * 6. If the right string is contained within the left string, the difference in length is returned.
    * If none of the above conditions were met, the Levenshtein algorithm is used.
    */
    function LevenshteinDistance($s1, $s2)
    {
    $sLeft = (strlen($s1) > strlen($s2)) ? $s1 : $s2;
    $sRight = (strlen($s1) > strlen($s2)) ? $s2 : $s1;
    $nLeftLength = strlen($sLeft);
    $nRightLength = strlen($sRight);
    if (    $nLeftLength == 0)
    return     $nRightLength;
    else if (    $nRightLength == 0)
    return     $nLeftLength;
    else if (    $sLeft === $sRight)
    return     0;
    else if ((    $nLeftLength < $nRightLength) && (strpos($sRight, $sLeft) !== FALSE))
    return     $nRightLength - $nLeftLength;
    else if ((    $nRightLength < $nLeftLength) && (strpos($sLeft, $sRight) !== FALSE))
    return     $nLeftLength - $nRightLength;
    else {
    $nsDistance = range(1, $nRightLength + 1);
    for (    $nLeftPos = 1; $nLeftPos <= $nLeftLength; ++$nLeftPos)
    {
    $cLeft = $sLeft[$nLeftPos - 1];
    $nDiagonal = $nLeftPos - 1;
    $nsDistance[0] = $nLeftPos;
    for (    $nRightPos = 1; $nRightPos <= $nRightLength; ++$nRightPos)
    {
    $cRight = $sRight[$nRightPos - 1];
    $nCost = ($cRight == $cLeft) ? 0 : 1;
    $nNewDiagonal = $nsDistance[$nRightPos];
    $nsDistance[$nRightPos] =
    min($nsDistance[$nRightPos] + 1,
    $nsDistance[$nRightPos - 1] + 1,
    $nDiagonal + $nCost);
    $nDiagonal = $nNewDiagonal;
    }
    }
    return     $nsDistance[$nRightLength];
    }
    }
    ?>
    up
    9
    Johan Gennesson php at genjo dot fr
    8 years ago
    Please, be aware that:

    <?php
    // Levenshtein Apostrophe (U+0027 &#39;) and Right Single Quotation Mark (U+2019 &#8217;)
    echo levenshtein("'", "’");
    ?>

    will output 3!
    up
    12
    engineglue at gmail dot com
    12 years ago
    I really like [the manual's] example for the use of the levenshtein function to match against an array. I ran into the need to specify the sensitivity of the result. There are circumstances when you want it to return false if the match is way out of line. I wouldn't want "marry had a little lamb" to match with "saw viii" simply because it was the best match in the array. Hence the need for sensitivity:

    <?php
    function wordMatch($words, $input, $sensitivity){
    $shortest = -1;
    foreach (    $words as $word) {
    $lev = levenshtein($input, $word);
    if (    $lev == 0) {
    $closest = $word;
    $shortest = 0;
    break;
    }
    if (    $lev <= $shortest || $shortest < 0) {
    $closest = $word;
    $shortest = $lev;
    }
    }
    if(    $shortest <= $sensitivity){
    return     $closest;
    } else {
    return     0;
    }
    }

    $word = 'PINEEEEAPPLE';

    $words = array('apple','pineapple','banana','orange',
    'radish','carrot','pea','bean','potato');

    echo     wordMatch($words, strtolower($word), 2);
    ?>
    up
    3
    fgilles at free dot fr
    23 years ago
    Exempla of use for a forum: users can't post messages too much uppercased

    <?php
    if ((strlen($subject)>10) and ( ( levenshtein ($subject, strtolower ($subject) / strlen ($subject) ) > .3 ) ){
    $subject = strtolower($subject);
    }
    ?>
    up
    8
    dale3h
    16 years ago
    Using PHP's example along with Patrick's comparison percentage function, I have come up with a function that returns the closest word from an array, and assigns the percentage to a referenced variable:

    <?php
    function closest_word($input, $words, &$percent = null) {
    $shortest = -1;
    foreach (    $words as $word) {
    $lev = levenshtein($input, $word);

    if (    $lev == 0) {
    $closest = $word;
    $shortest = 0;
    break;
    }

    if (    $lev <= $shortest || $shortest < 0) {
    $closest = $word;
    $shortest = $lev;
    }
    }

    $percent = 1 - levenshtein($input, $closest) / max(strlen($input), strlen($closest));

    return     $closest;
    }
    ?>

    Usage:
    <?php
    $input     = 'carrrot';
    $words = array('apple','pineapple','banana','orange',
    'radish','carrot','pea','bean','potato');

    $percent = null;
    $found = closest_word($input, $words, $percent);

    printf('Closest word to "%s": %s (%s%% match)', $input, $found, round($percent * 100, 2));
    ?>

    I found that lowercasing the array prior to comparing yields a better comparison when the case is not of importance, for example: comparing a user-inputted category to a list of existing categories.

    I also found that when the percentage was above 75%, it was usually the match that I was looking for.
    up
    2
    june05 at tilo-hauke dot de
    19 years ago
    //levenshtein for arrays
    function array_levenshtein($array1,$array2)
    { $aliases= array_flip(array_values(array_unique(array_merge($array1,$array2))));
    if(count($aliases)>255) return -1;
    $stringA=''; $stringB='';
    foreach($array1 as $entry) $stringA.=chr($aliases[$entry]);
    foreach($array2 as $entry) $stringB.=chr($aliases[$entry]);
    return levenshtein($stringA,$stringB);
    }

    // e.g. use array_levenshtein to detect special expressions in unser-inputs

    echo array_levenshtein(split(" ", "my name is xxx"), split(" ","my name is levenshtein"));

    //output: 1
    up
    3
    yhoko at yhoko dot com
    8 years ago
    Note that this function might cause problems when working with multibyte charactes like in UTF-8. Example:

    <?php
    print( similar_text( 'hä', 'hà' ) ); // Returns 2 where only 1 character matches
    ?>
    up
    12
    dschultz at protonic dot com
    24 years ago
    It's also useful if you want to make some sort of registration page and you want to make sure that people who register don't pick usernames that are very similar to their passwords.
    up
    8
    carey at NOSPAM dot internode dot net dot au
    18 years ago
    I have found that levenshtein is actually case-sensitive (in PHP 4.4.2 at least).

    <?php
    $distance    =levenshtein('hello','ELLO');
    echo     "$distance";
    ?>

    Outputs: "5", instead of "1". If you are implementing a fuzzy search feature that makes use of levenshtein, you will probably need to find a way to work around this.
    up
    5
    "inerte" is my hotmail.com username
    21 years ago
    I am using this function to avoid duplicate information on my client's database.

    After retrieving a series of rows and assigning the results to an array values, I loop it with foreach comparing its levenshtein() with the user supplied string.

    It helps to avoid people re-registering "John Smith", "Jon Smith" or "Jon Smit".

    Of course, I can't block the operation if the user really wants to, but a suggestion is displayed along the lines of: "There's a similar client with this name.", followed by the list of the similar strings.
    up
    7
    justin at visunet dot ie
    19 years ago
    <?php

    /*********************************************************************
    * The below func, btlfsa, (better than levenstien for spelling apps)
    * produces better results when comparing words like haert against
    * haart and heart.
    *
    * For example here is the output of levenshtein compared to btlfsa
    * when comparing 'haert' to 'herat, haart, heart, harte'
    *
    * btlfsa('haert','herat'); output is.. 3
    * btlfsa('haert','haart'); output is.. 3
    * btlfsa('haert','harte'); output is.. 3
    * btlfsa('haert','heart'); output is.. 2
    *
    * levenshtein('haert','herat'); output is.. 2
    * levenshtein('haert','haart'); output is.. 1
    * levenshtein('haert','harte'); output is.. 2
    * levenshtein('haert','heart'); output is.. 2
    *
    * In other words, if you used levenshtein, 'haart' would be the
    * closest match to 'haert'. Where as, btlfsa sees that it should be
    * 'heart'
    */

    function btlfsa($word1,$word2)
    {
    $score = 0;

    // For each char that is different add 2 to the score
    // as this is a BIG difference

    $remainder = preg_replace("/[".preg_replace("/[^A-Za-z0-9\']/",' ',$word1)."]/i",'',$word2);
    $remainder .= preg_replace("/[".preg_replace("/[^A-Za-z0-9\']/",' ',$word2)."]/i",'',$word1);
    $score = strlen($remainder)*2;

    // Take the difference in string length and add it to the score
    $w1_len = strlen($word1);
    $w2_len = strlen($word2);
    $score += $w1_len > $w2_len ? $w1_len - $w2_len : $w2_len - $w1_len;

    // Calculate how many letters are in different locations
    // And add it to the score i.e.
    //
    // h e a r t
    // 1 2 3 4 5
    //
    // h a e r t a e = 2
    // 1 2 3 4 5 1 2 3 4 5
    //

    $w1 = $w1_len > $w2_len ? $word1 : $word2;
    $w2 = $w1_len > $w2_len ? $word2 : $word1;

    for(    $i=0; $i < strlen($w1); $i++)
    {
    if ( !isset(    $w2[$i]) || $w1[$i] != $w2[$i] )
    {
    $score++;
    }
    }

    return     $score;
    }

    // *************************************************************
    // Here is a full code example showing the difference

    $misspelled = 'haert';

    // Imagine that these are sample suggestions thrown back by soundex or metaphone..
    $suggestions = array('herat', 'haart', 'heart', 'harte');

    // Firstly order an array based on levenshtein
    $levenshtein_ordered = array();
    foreach (     $suggestions as $suggestion )
    {
    $levenshtein_ordered[$suggestion] = levenshtein($misspelled,$suggestion);
    }
    asort($levenshtein_ordered, SORT_NUMERIC );

    print     "<b>Suggestions as ordered by levenshtein...</b><ul><pre>";
    print_r($levenshtein_ordered);
    print     "</pre></ul>";

    // Secondly order an array based on btlfsa
    $btlfsa_ordered = array();
    foreach (     $suggestions as $suggestion )
    {
    $btlfsa_ordered[$suggestion] = btlfsa($misspelled,$suggestion);
    }
    asort($btlfsa_ordered, SORT_NUMERIC );

    print     "<b>Suggestions as ordered by btlfsa...</b><ul><pre>";
    print_r($btlfsa_ordered);
    print     "</pre></ul>";

    ?>
    up
    2
    atx dot antrax at gmail dot com
    16 years ago
    I have made a function that removes the length-limit of levenshtein function and ajust the result with similar_text:

    <?php
    function _similar($str1, $str2) {
    $strlen1=strlen($str1);
    $strlen2=strlen($str2);
    $max=max($strlen1, $strlen2);

    $splitSize=250;
    if(    $max>$splitSize)
    {
    $lev=0;
    for(    $cont=0;$cont<$max;$cont+=$splitSize)
    {
    if(    $strlen1<=$cont || $strlen2<=$cont)
    {
    $lev=$lev/($max/min($strlen1,$strlen2));
    break;
    }
    $lev+=levenshtein(substr($str1,$cont,$splitSize), substr($str2,$cont,$splitSize));
    }
    }
    else
    $lev=levenshtein($str1, $str2);

    $porcentage= -100*$lev/$max+100;
    if(    $porcentage>75)//Ajustar con similar_text
    similar_text($str1,$str2,$porcentage);

    return     $porcentage;
    }
    ?>
    up
    4
    WiLDRAGoN
    9 years ago
    Some small changes allow you to calculate multiple words.

    <?php

    $input     = array();
    $dictionary = array();
    foreach (    $input as $output) {
    $shortest = -1;
    foreach (    $dictionary as $word) {
    $lev = levenshtein($output, $word);
    if (    $lev == 0) {
    $closest = $word;
    $shortest = 0;
    }
    if (    $lev <= $shortest || $shortest < 0) {
    $closest = $word;
    $shortest = $lev;
    }
    }
    echo     "Input word: $output\n";
    if (    $shortest == 0) {
    echo     "Exact match found: $closest\n";
    } else {
    echo     "Did you mean: $closest?\n";
    }
    }

    ?>
    up
    4
    Chaim Chaikin
    13 years ago
    As regards to Example #1 above, would it not be more efficient to first use a simple php == comparison to check if the strings are equal even before testing the word with levenshtein().

    Something like this:

    <?php
    // input misspelled word
    $input = 'carrrot';

    // array of words to check against
    $words = array('apple','pineapple','banana','orange',
    'radish','carrot','pea','bean','potato');

    // no shortest distance found, yet
    $shortest = -1;

    // loop through words to find the closest
    foreach ($words as $word) {

    // check for an exact match
    if ($input == $word) {

    // closest word is this one (exact match)
    $closest = $word;
    $shortest = 0;

    // break out of the loop; we've found an exact match
    break;
    }

    // calculate the distance between the input word,
    // and the current word
    $lev = levenshtein($input, $word);

    // if this distance is less than the next found shortest
    // distance, OR if a next shortest word has not yet been found
    if ($lev <= $shortest || $shortest < 0) {
    // set the closest match, and shortest distance
    $closest = $word;
    $shortest = $lev;
    }
    }

    echo     "Input word: $input\n";
    if (    $shortest == 0) {
    echo     "Exact match found: $closest\n";
    } else {
    echo     "Did you mean: $closest?\n";
    }

    ?>
    up
    2
    mcreuzer at r-world dot com
    19 years ago
    I am using the Levenshtein distance to SORT my search results.

    I have a search page for peoples names. I do a SOUNDEX() search on the name in mysql. MySQL SOUNDEX() will perform the "fuzzy" search for me.

    I then calculate the Levenshtein distance between the search term and the actual name found by the SOUNDEX() search. This will give me a score on how close my results are to the search string.

    I can the sort my results for display listing the closest results first.

    <?php
    // PHP CODE INCLUDING DB LOOKUPS HERE
    usort($searchresults, "finallevenshteinsortfunction");

    function     finallevenshteinsortfunction($a, $b)
    {
    if((    $a['levenshtein'] > $b['levenshtein']) || ( $a['levenshtein'] == $b['levenshtein'] && strnatcasecmp( $a['Last_Name'], $b['Last_Name']) >= 1) ){ return $a['levenshtein'];} // Ok... The levenstein is greater OR with the same levenshtein, the last name is alphanumerically first
    elseif($a['levenshtein'] == $b['levenshtein']){ return '0';} // The levenstein matches
    elseif($a['levenshtein'] < $b['levenshtein']){ return -$a['levenshtein'];}
    else{die(    "<!-- a horrable death -->");}
    }
    ?>
    up
    2
    gzink at zinkconsulting dot com
    20 years ago
    Try combining this with metaphone() for a truly amazing fuzzy search function. Play with it a bit, the results can be plain scary (users thinking the computer is almost telepathic) when implemented properly. I wish spell checkers worked as well as the code I've written.

    I would release my complete code if reasonable, but it's not, due to copyright issues. I just hope that somebody can learn from this little tip!
    up
    1
    bisqwit at iki dot fi
    22 years ago
    At the time of this manual note the user defined thing
    in levenshtein() is not implemented yet. I wanted something
    like that, so I wrote my own function. Note that this
    doesn't return levenshtein() difference, but instead
    an array of operations to transform a string to another.

    Please note that the difference finding part (resync)
    may be extremely slow on long strings.

    <?php

    /* matchlen(): returns the length of matching
    * substrings at beginning of $a and $b
    */
    function matchlen(&$a, &$b)
    {
    $c=0;
    $alen = strlen($a);
    $blen = strlen($b);
    $d = min($alen, $blen);
    while(    $a[$c] == $b[$c] && $c < $d)
    $c++;
    return     $c;
    }

    /* Returns a table describing
    * the differences of $a and $b */
    function calcdiffer($a, $b)
    {
    $alen = strlen($a);
    $blen = strlen($b);
    $aptr = 0;
    $bptr = 0;

    $ops = array();

    while(    $aptr < $alen && $bptr < $blen)
    {
    $matchlen = matchlen(substr($a, $aptr), substr($b, $bptr));
    if(    $matchlen)
    {
    $ops[] = array('=', substr($a, $aptr, $matchlen));
    $aptr += $matchlen;
    $bptr += $matchlen;
    continue;
    }
    /* Difference found */

    $bestlen=0;
    $bestpos=array(0,0);
    for(    $atmp = $aptr; $atmp < $alen; $atmp++)
    {
    for(    $btmp = $bptr; $btmp < $blen; $btmp++)
    {
    $matchlen = matchlen(substr($a, $atmp), substr($b, $btmp));
    if(    $matchlen>$bestlen)
    {
    $bestlen=$matchlen;
    $bestpos=array($atmp,$btmp);
    }
    if(    $matchlen >= $blen-$btmp)break;
    }
    }
    if(!    $bestlen)break;

    $adifflen = $bestpos[0] - $aptr;
    $bdifflen = $bestpos[1] - $bptr;

    if(    $adifflen)
    {
    $ops[] = array('-', substr($a, $aptr, $adifflen));
    $aptr += $adifflen;
    }
    if(    $bdifflen)
    {
    $ops[] = array('+', substr($b, $bptr, $bdifflen));
    $bptr += $bdifflen;
    }
    $ops[] = array('=', substr($a, $aptr, $bestlen));
    $aptr += $bestlen;
    $bptr += $bestlen;
    }
    if(    $aptr < $alen)
    {
    /* b has too much stuff */
    $ops[] = array('-', substr($a, $aptr));
    }
    if(    $bptr < $blen)
    {
    /* a has too little stuff */
    $ops[] = array('+', substr($b, $bptr));
    }
    return     $ops;
    }


    Example:

    $tab = calcdiffer('T?m? on jonkinlainen testi',
    'T?m? ei ole mink??nlainen testi.');
    $ops = array('='=>'Ok', '-'=>'Remove', '+'=>'Add');
    foreach(    $tab as $k)
    echo     $ops[$k[0]], " '", $k[1], "'\n";

    Example output:

    Ok 'T?m? '
    Remove 'on jonki'
    Add 'ei ole mink??'
    Ok 'nlainen testi'
    Add '.'
    up
    1
    hartmut at php dot net
    3 months ago
    This function operates on bytes, not characters, so it is only of limited use when operating on UTF-8 encoded Unicode strings.

    Running the input strings through Normalizer ( https://www.php.net/manual/en/class.normalizer.php ) can at least somewhat help with this, but you still need to be aware that replacing, inserting or deleting a single UTF-8 encoded unicode character can wrongly report a cost of 2, 3 or 4 depending on the length of the UTF-8 sequence representing it, or even more when dealing with combining character modifiers.
    up
    0
    peratik at gmail dot com
    7 years ago
    python get_close_matches equivalent:

    function get_close_matches($str, $arr) {
    $closest = 1000;
    $word = false;
    foreach($arr as $w) {
    $po = levenshtein($str, $w);
    if ($po<$closest) {
    $closest = $po;
    $word = $w;
    }
    }
    return $word;
    }
    up
    0
    qbolec
    9 years ago
    For the rare occassions, where you want:
    1. multibyte UTF-8 characters
    2. linear memory consumption (that is O(n+m) , not O(n*m))
    3. learn the string which is the longest common subsequence
    4. reasonable (that is O(n*m)) time complexity
    Consider this implementation:
    <?php
    class Strings
    {
    public static function     len($a){
    return     mb_strlen($a,'UTF-8');
    }
    public static function     substr($a,$x,$y=null){
    if(    $y===NULL){
    $y=self::len($a);
    }
    return     mb_substr($a,$x,$y,'UTF-8');
    }
    public static function     letters($a){
    $len = self::len($a);
    if(    $len==0){
    return array();
    }else if(    $len == 1){
    return array(    $a);
    }else{
    return     Arrays::concat(
    self::letters(self::substr($a,0,$len>>1)),
    self::letters(self::substr($a,$len>>1))
    );
    }
    }
    private static function     lcs_last_column(array $A,array $B){
    $al=count($A);
    $bl=count($B);
    $last_column = array();
    for(    $i=0;$i<=$al;++$i){
    $current_row = array();
    for(    $j=0;$j<=$bl;++$j){
    //$a[0,$i) vs $b[0,$j)
    if($i==0 || $j == 0){
    $v = 0;
    }else if(    $A[$i-1]===$B[$j-1]){
    $v = 1 + $last_row[$j-1];
    }else{
    $v = max($last_row[$j],$current_row[$j-1]);
    }
    $current_row[] = $v;
    }
    $last_column[] = $current_row[$bl];
    $last_row = $current_row;
    }
    return     $last_column;
    }
    public static function     lcs($a,$b){
    $A = self::letters($a);
    $B = self::letters($b);
    $bl=count($B);
    if(    $bl==0){
    return     '';
    }else if(    $bl==1){
    return     FALSE===array_search($B[0],$A,true)?'':$B[0];
    }
    $left=self::lcs_last_column($A,array_slice($B,0,$bl>>1));
    $right=array_reverse(self::lcs_last_column(array_reverse($A),array_reverse(array_slice($B,$bl>>1))));

    $best_i = 0;
    $best_lcs = 0;
    foreach(    $left as $i => $lcs_left){
    $option = $lcs_left + $right[$i];
    if(    $best_lcs < $option){
    $best_lcs = $option;
    $best_i = $i;
    }
    }
    return
    self::lcs(self::substr($a,0,$best_i), self::substr($b,0,$bl>>1)).
    self::lcs(self::substr($a,$best_i), self::substr($b,$bl>>1));
    }
    ?>
    This is a classic implentation in which several tricks are used:
    1. the strings are exploded into multi-byte characters in O(n lg n) time
    2. instead of searching for the longest path in a precomputed two-dimensional array, we search for the best point which lays in the middle column. This is achieved by spliting the second string in half, and recursively calling the algorithm twice. The only thing we need from the recursive call are the values in the middle column. The trick is to return the last column from each recursive call, which is what we need for the left part, but requires one more trick for the right part - we simply mirror the strings and the array so that the last column is the first column. Then we just find the row which maximizes the sum of lenghts in each part.
    3. one can prove that the time consumed by the algorithm is proportional to the area of the (imaginary) two-dimensional array, thus it is O(n*m).
    up
    0
    luka8088 at gmail dot com
    16 years ago
    Simple levenshtein function without string length limit ...

    <?php

    function levenshtein2($str1, $str2, $cost_ins = null, $cost_rep = null, $cost_del = null) {
    $d = array_fill(0, strlen($str1) + 1, array_fill(0, strlen($str2) + 1, 0));
    $ret = 0;

    for (    $i = 1; $i < strlen($str1) + 1; $i++)
    $d[$i][0] = $i;
    for (    $j = 1; $j < strlen($str2) + 1; $j++)
    $d[0][$j] = $j;

    for (    $i = 1; $i < strlen($str1) + 1; $i++)
    for (    $j = 1; $j < strlen($str2) + 1; $j++) {
    $c = 1;
    if (    $str1{$i - 1} == $str2{$j - 1})
    $c = 0;
    $d[$i][$j] = min($d[$i - 1][$j] + 1, $d[$i][$j - 1] + 1, $d[$i - 1][$j - 1] + $c);
    $ret = $d[$i][$j];
    }

    return     $ret;
    }

    ?>
    up
    1
    genialbrainmachine at dot IHATESPAM dot tiscali dot it
    21 years ago
    I wrote this function to have an "intelligent" comparison between data to be written in a DB
    and already existent data. Not ony calculating distances but also balancing distances for
    each field.
    <?php
    /*
    This function calculate a balanced percentage distance between an array of strings
    "$record" and a compared array "$compared", balanced through an array of
    weights "$weight". The three arrays must have the same indices.
    For an unbalanced distance, set all weights to 1.
    The used formula is:
    percentage distance = sum(field_levenshtein_distance * field_weight) / sum(record_field_length * field_weight) * 100
    */
    function search_similar($record, $weights, $compared, $precision=2) {
    $field_names = array_keys($record);
    # "Weighted length" of $record and "weighted distance".
    foreach ($field_names as $field_key) {
    $record_weight += strlen($record[$field_key]) * $weights[$field_key];
    $weighted_distance += levenshtein($record[$field_key],$compared[$field_key]) * $weights[$field_key];
    }
    # Building the result..
    if ($record_weight) {
    return     round(($weighted_distance / $record_weight * 100),$precision);
    } elseif ((    strlen(implode("",$record)) == 0) && (strlen(implode("",$compared)) == 0)) { // empty records
    return round(0,$precision);
    } elseif (    array_sum($weights) == 0) { // all weights == 0
    return round(0,$precision);
    } else {
    return     false;
    }
    /*
    Be very careful distinguising 0 result and false result.
    The function results 0 ('0.00' if $precision is 2 and so on) if:
    - $record and $compared are equals (even if $record and $compared are empty);
    - all weights are 0 (the meaning could be "no care about any field").
    Conversely, the function results false if $record is empty, but the weights
    are not all 0 and $compared is not empty. That cause a "division by 0" error.
    I wrote this kind of check:

    if ($rel_dist = search_similar(...)) {
    print $rel_dist;
    } elseif ($rel_dist == "0.00") { // supposing that $precision is 2
    print $rel_dist;
    } else {
    print "infinite";
    }

    */
    }
    ?>
    up
    0
    dinesh AT dinsoft DOT net
    18 years ago
    Here is a string resynch function:

    <?php
    // Trouve les operations a effectuer pour modifier $b en $a en exploitant leurs similitudes (Finds the operations required to change $b to $a)
    // Identique a la fonction Resynch Compare de Hex Workshop
    //
    // Parametres:
    // $a Premiere chaine (cible, target)
    // $b Seconde chaine (source)
    // $l Nombre d'octets devant correspondre pour etre consides comme un bloc similaire (number of matching bytes required)
    // $s Distance maximale dans laquelle les blocs similaires sont cherches (search window)
    //
    // Retourne:
    // Array
    // Array
    // [0] Operation: + Add , - Del , / Replace, = Match
    // [1] Source offset
    // [2] Source count
    // [3] Target offset
    // [4] Target count
    //
    function str_resynch($a,$b,$l=32,$s=2048) {
    $r=array();
    for(    $i=0,$c=strlen($a),$cc=strlen($b),$ii=0,$z=$s-1,$z2=($z<<1)+1; $i<$c; $i++) {
    $d=$i-$z;
    $d=($d<$ii)?substr($b,$ii,$z2-$ii+$d):substr($b,$d,$z2);

    $p=strpos($d,$a{$i});
    $n=0;
    while (    $p!==FALSE) {
    $m=1;
    $bi=$i;
    $bp=$p;
    $p+=$ii;
    while ((++    $i<$c) && (++$p<$cc)) {
    if (    $a{$i}!=$b{$p}) break;
    $m++;
    }
    if (    $m<$l) {
    $i=$bi;
    $n=$bp+1;
    $p=@strpos($d,$a{$i},$n);
    }
    else {
    $i--;
    $r[]=array($bi,$bp+$ii,$m); // offset a, offset b, Count
    $ii=$p;
    break;
    }
    }
    }

    if (!    count($r)) return ($cc)?array('/',0,$c,0,$cc):array(array('+',0,$c,0,0));

    $o=array();
    $bi=0;
    $bp=0;
    for(    $i=0,$m=count($r);$i<$m;$i++) {
    if (    $r[$i][0]!=$bi) {
    if (    $r[$i][1]!=$bp) {
    // Replace
    $o[]=array('/',$bi,$r[$i][0]-$bi,$bp,$r[$i][1]-$bp);
    $bi=$r[$i][0];
    $bp=$r[$i][1];
    }
    else {
    // Insertion
    $o[]=array('+',$bi,$r[$i][0]-$bi,$bp,0);
    $bi=$r[$i][0];
    }
    }
    elseif (    $r[$i][1]!=$bp) {
    // Delete
    $o[]=array('-',$bi,0,$bp,$r[$i][1]-$bp);
    $bp=$r[$i][1];
    }

    // Match
    $o[]=array('=',$r[$i][0],$r[$i][2],$r[$i][1],$r[$i][2]);
    $bi+=$r[$i][2];
    $bp+=$r[$i][2];
    }

    if (    $c!=$bi) {
    if (    $cc!=$bp) $o[]=array('/',$bi,$c-$bi,$bp,$cc-$bp);
    else     $o[]=array('+',$bi,$c-$bi,$bp,0);
    }
    elseif (    $cc!=$bp) $o[]=array('-',$bi,0,$bp,$cc-$bp);

    return     $o;
    }
    ?>
    up
    0
    Anonymous
    22 years ago
    For spell checking applications, delay could be tolerable if you assume the typist got the first two or three chars of each word right. Then you'd only need to calc distances for a small segment of the dictionary. This is a compromise but one I think a lot of spell checkers make.
    For an example of site search using this function look at the PHP manual search button on this page. It appears to be doing this for the PHP function list.
    up
    0
    ad1n at dc dot uba dot ar
    24 years ago
    One application of this is when you want to look for a similar match instead of an exact one. You can sort the results of checking the distances of a word to a dictionary and sort them to see which were the more similar ones. Of course it will be a quite resourse consuming task anyway.
    up
    -1
    jlsalinas at gmx dot net
    21 years ago
    Regarding the post by fgilles on April 26th 2001, I suggest not to use levenshtein() function to test for over-uppercasing unless you've got plenty of time to waste in your host. ;) Anyhow, I think it's a useful feature, as I get really annoyed when reading whole messages in uppercase.

    PHP's levenshtein() function can only handle up to 255 characters, which is not realistic for user input (only the first paragraph oh this post has 285 characters). If you choose to use a custom function able to handle more than 255 characters, efficiency is an important issue.

    I use this function, specific for this case, but much faster:

    function ucase_percent ($str) {
    $str2 = strtolower ($str);

    $l = strlen ($str);
    $ucase = 0;

    for ($i = 0; $i < $l; $i++) {
    if ($str{$i} != $str2{$i}) {
    $ucase++;
    }
    }

    return $ucase / $l * 100.0;
    }

    I think 10% is enough for written English (maybe other languages like German, which use more capital letters, need more). With some sentencies in uppercase (everybody has the right to shout occasionally), 20% would be enough; so I use a threshold of 30%. When exceeded, I lowercase the whole message.

    Hope you find it useful and it helps keeping the web free of ill-mannered people.
    ＋add a note
    To Top