declare

    (PHP 4, PHP 5, PHP 7, PHP 8)

    declare 结构用来设定一段代码的执行指令。declare 的语法和其它流程控制结构相似： 

    declare (directive)
    statement

    directive 部分允许设定 declare 代码段的行为。 目前只认识三个指令：

    因为本指令是在文件编译时处理的，所以指令只接受字面量的值。 无法使用变量和常量。下面为你演示：

    <?php
    // 这样是有效的：
    declare(ticks=1);

    // 这样是无效的：
    const TICK_VALUE = 1;
    declare(    ticks=TICK_VALUE);
    ?>

    declare 代码段中的 statement 部分将被执行——怎样执行以及执行中有什么副作用出现取决于 directive 中设定的指令。

    declare 结构也可用于全局范围，影响到其后的所有代码（但如果有 declare 结构的文件被其它文件包含，则对包含它的父文件不起作用）。

    <?php
    // 两者相等：

    // 可以这样用：
    declare(ticks=1) {
    // 这里写完整的脚本
    }

    // 也可以这样用：
    declare(ticks=1);
    // 这里写完整的脚本
    ?>

    Ticks

    Tick（时钟周期）是一个在 declare 代码段中解释器每执行 N 条可计时的低级语句就会发生的事件。N 的值是在 declare 中的 directive 部分用 ticks=N 来指定的。

    不是所有语句都可计时。通常条件表达式和参数表达式都不可计时。

    在每个 tick 中出现的事件是由 register_tick_function() 来指定的。更多细节见下面的例子。注意每个 tick 中可以出现多个事件。

    示例 #1 Tick 的用法示例

    <?php

    declare(ticks=1);

    // 每次 tick 事件都会调用该函数
    function tick_handler()
    {
    echo     "tick_handler() called\n";
    }

    register_tick_function('tick_handler'); // 引起 tick 事件

    $a = 1; // 引起 tick 事件

    if ($a > 0) {
    $a += 2; // 引起 tick 事件
    print $a; // 引起 tick 事件
    }

    ?>

    参见 register_tick_function() 和 unregister_tick_function()。

    Encoding

    可以用 encoding 指令来对每段脚本指定其编码方式。

    示例 #2 对脚本指定编码方式

    <?php
    declare(encoding='ISO-8859-1');
    // 在这里写代码
    ?>

    警告

    当和命名空间结合起来时 declare 的唯一合法语法是 declare(encoding='...');，其中 ... 是编码的值。而 declare(encoding='...') {} 将在与命名空间结合时产生解析错误。

    参见 zend.script_encoding。

    改进此页面

    了解如何改进此页面 • 提交拉取请求 • 报告一个错误
    ＋添加备注

    用户贡献的备注 10 notes

    up
    65
    Anonymous
    14 years ago
    It's amazing how many people didn't grasp the concept here. Note the wording in the documentation. It states that the tick handler is called every n native execution cycles. That means native instructions, not including system calls (i'm guessing). This can give you a very good idea if you need to optimize a particular part of your script, since you can measure quite effectively how many native instructions are in your actual code.

    A good profiler would take that into account, and force you, the developer, to include calls to the profiler as you're entering and leaving every function. That way you'd be able to keep an eye on how many cycles it took each function to complete. Independent of time.

    That is extremely powerful, and not to be underestimated. A good solution would allow aggregate stats, so the total time in a function would be counted, including inside called functions.
    up
    22
    Kubo2
    9 years ago
    Note that in PHP 7 <?php declare(encoding='...'); ?> throws an E_WARNING if Zend Multibyte is turned off.
    up
    22
    sawyerrken at gmail dot com
    11 years ago
    In the following example:

    <?php
    function handler(){
    print     "hello <br />";
    }

    register_tick_function("handler");

    declare(    ticks = 1){
    $b = 2;
    }     //closing curly bracket tickable
    ?>

    "Hello" will be displayed twice because the closing curly bracket is also tickable.

    One may wonder why the opening curly bracket is not tickable if the closing is tickable. This is because the instruction for PHP to start ticking is given by the opening curly bracket so the ticking starts immediately after it.
    up
    5
    digitalaudiorock at gmail dot com
    5 years ago
    Regarding my previous comment as to the change in scope of declare(ticks=1) between 5.6 and 7.x, I intended to mention another example of the affect this can have on signal handlers:

    If your script uses declare(ticks=1) and assigns handlers, in 5.6 signals will get caught and call the handler even when the code that is running is in an included file (where the included file doesn't have the declaration). However in 7.x the signal wouldn't get caught until the code returns to the main script.

    The best solution to that is to use pcntl_async_signals(true) when it's available, which will allow the signals to get caught regardless of what file the code happens to be in.
    up
    9
    digitalaudiorock at gmail dot com
    5 years ago
    A few important things to note for anyone using this in conjunction with signal handlers:

    If anyone is trying to optionally use either pcntl_async_signals() when available (PHP >= 7.1) or ticks for older versions, this is not possible...at least not in a way that does NOT enable ticks for newer PHP versions. This is because there is simply no way to conditionally declare ticks. For example, the following will "work" but not in the way you might expect:

    <?php
    if (function_exists('pcntl_async_signals')) {
    pcntl_async_signals(true);
    } else {
    declare(    ticks=1);
    }
    ?>

    While signal handlers will work with this for old and new version, ticks WILL be enabled even in the case where pcntl_async_signals exists, simply because the declare statement exists. So the above is functionally equivalent to:

    <?php
    if (function_exists('pcntl_async_signals')) pcntl_async_signals(true);
    declare(    ticks=1);
    ?>

    Another thing to be aware of is that the scoping of this declaration changed a bit from PHP 5.6 to 7.x...actually it was corrected apparently as noted here:

    http://php.net/manual/en/function.register-tick-function.php#121204

    This can cause some very confusing behavior. One example is with the pear/System_Daemon module. With PHP 5.6 that will work with a SIGTERM handler even if the script using it doesn't itself use declare(ticks=1), but does not work in PHP 7 unless the script itself has the declaration. Not only does the handler not get called, but the signal does nothing at all, and the script doesn't exit.

    A side note regarding ticks that's annoyed me for some time: As if there wasn't enough confusion around all this, the Internet is full of false rumors that ticks were deprecated and are being removed, and I believe they all started here:

    http://www.hackingwithphp.com/4/21/0/the-declare-function-and-ticks

    Despite a very obscure author's note at the very end of the page saying he got that wrong (that even I just noticed), the first very prominent sentence of the article still says this, and that page is near the top of any Google search.
    up
    7
    php dot net at e-z dot name
    11 years ago
    you can register multiple tick functions:

    <?PHP
    function a() { echo "a\n"; }
    function     b() { echo "b\n"; }

    register_tick_function('a');
    register_tick_function('b');
    register_tick_function('b');
    register_tick_function('b');

    ?>

    will output on every tick:
    a
    b
    b
    b
    up
    5
    ja2016 at wir dot pl
    7 years ago
    Don't use uft-8 encoding with BOM. Then fatal error occurs ALWAYS. Substitute it with utf-8 without BOM.

    ---

    *BOM*
    <?php
    declare(strict_types=1);
    //Fatal error: strict_types declaration must be the very first statement in the script
    up
    5
    fok at nho dot com dot br
    21 years ago
    This is a very simple example using ticks to execute a external script to show rx/tx data from the server

    <?php

    function traf(){
    passthru( './traf.sh' );
    echo     "<br />\n";
    flush(); // keeps it flowing to the browser...
    sleep( 1 );
    }

    register_tick_function( "traf" );

    declare(     ticks=1 ){
    while(     true ){} // to keep it running...
    }

    ?>

    contents of traf.sh:
    # Shows TX/RX for eth0 over 1sec
    #!/bin/bash

    TX1=`cat /proc/net/dev | grep "eth0" | cut -d: -f2 | awk '{print $9}'`
    RX1=`cat /proc/net/dev | grep "eth0" | cut -d: -f2 | awk '{print $1}'`
    sleep 1
    TX2=`cat /proc/net/dev | grep "eth0" | cut -d: -f2 | awk '{print $9}'`
    RX2=`cat /proc/net/dev | grep "eth0" | cut -d: -f2 | awk '{print $1}'`

    echo -e "TX: $[ $TX2 - $TX1 ] bytes/s \t RX: $[ $RX2 - $RX1 ] bytes/s"
    #--= the end. =--
    up
    4
    markandrewslade at dontspamemeat dot gmail
    15 years ago
    Note that the two methods for calling declare are not identical.

    Method 1:

    <?php
    // Print "tick" with a timestamp and optional suffix.
    function do_tick($str = '') {
    list(    $sec, $usec) = explode(' ', microtime());
    printf("[%.4f] Tick.%s\n", $sec + $usec, $str);
    }
    register_tick_function('do_tick');

    // Tick once before declaring so we have a point of reference.
    do_tick('--start--');

    // Method 1
    declare(ticks=1);
    while(    1) sleep(1);

    /* Output:
    [1234544435.7160] Tick.--start--
    [1234544435.7161] Tick.
    [1234544435.7162] Tick.
    [1234544436.7163] Tick.
    [1234544437.7166] Tick.
    */

    ?>

    Method 2:
    <?php
    // Print "tick" with a timestamp and optional suffix.
    function do_tick($str = '') {
    list(    $sec, $usec) = explode(' ', microtime());
    printf("[%.4f] Tick.%s\n", $sec + $usec, $str);
    }
    register_tick_function('do_tick');

    // Tick once before declaring so we have a point of reference.
    do_tick('--start--');

    // Method 2
    declare(ticks=1) {
    while(    1) sleep(1);
    }

    /* Output:
    [1234544471.6486] Tick.--start--
    [1234544472.6489] Tick.
    [1234544473.6490] Tick.
    [1234544474.6492] Tick.
    [1234544475.6493] Tick.
    */
    ?>

    Notice that when using {} after declare, do_tick wasn't auto-called until about 1 second after we entered the declare {} block. However when not using the {}, do_tick was auto-called not once but twice immediately after calling declare();.

    I'm assuming this is due to how PHP handles ticking internally. That is, declare() without the {} seems to trigger more low-level instructions which in turn fires tick a few times (if ticks=1) in the act of declaring.
    up
    1
    ohcc at 163 dot com
    4 years ago
    It's possible to set directives at one time if every directive is supported.
    <?php
    declare(strict_types=1, encoding='UTF-8');
    ?>
    ＋添加备注
    To Top