Simple key white-list filter:
<?php
$arr = array('a' => 123, 'b' => 213, 'c' => 321);
$allowed = array('b', 'c');
print_r(array_intersect_key($arr, array_flip($allowed)));
?>
Will return:
Array
(
[b] => 213
[c] => 321
)
(PHP 5 >= 5.1.0, PHP 7, PHP 8)
array_intersect_key — Karşılaştırma için anahtarları kullanarak dizilerin kesişimini hesaplar
array_intersect_key() işlevi dizi
dizisinin tüm bağımsız değişkenlerde mevcut anahtarlarından oluşan bir ilişkisel
dizi döndürür.
diziDiğer dizilerin karşılaştırılacağı ilk dizi.
dizilerAnahtarları karşılaştırılacak diziler.
dizi dizisinin tüm bağımsız değişkenlerde mevcut
anahtarlarından oluşan bir ilişkisel dizi döndürür.
| Sürüm: | Açıklama |
|---|---|
| 8.0.0 | Bu işlev artık yalnızca tek bir bağımsız değişken ile çağrılabiliyor. Evvelve en az iki bağımsız değişken gerekirdi. |
Örnek 1 - array_intersect_key() örneği
<?php
$array1 = array('blue' => 1, 'red' => 2, 'green' => 3, 'purple' => 4);
$array2 = array('green' => 5, 'blue' => 6, 'yellow' => 7, 'cyan' => 8);
var_dump(array_intersect_key($array1, $array2));
?>Yukarıdaki örneğin çıktısı:
array(2) {
["blue"]=>
int(1)
["green"]=>
int(3)
}
Örnekte gördüğünüz gibi her iki dizide de sadece 'blue'
ve 'green' anahtarları ortak olduğundan dönen dizi
sadece bu elemanları içermektedir. Ayrıca, dizilerde
'blue' ve 'green' anahtarlı
elemanların değerlerinin farklı oluşuna da dikkat ediniz. Sadece
anahtarlara bakıldığından bir eşleşme oluşmakta ve sadece
dizi dizisindeki değerler döndürülmektedir.
İki anahtarın eşit olması için sadece ve sadece
(string) $anahtar1 === (string) $anahtar2 olmalıdır.
Başka bir deyişle, anahtarların dizgesel gösterimleri aynı olmalıdır.
Simple key white-list filter:
<?php
$arr = array('a' => 123, 'b' => 213, 'c' => 321);
$allowed = array('b', 'c');
print_r(array_intersect_key($arr, array_flip($allowed)));
?>
Will return:
Array
(
[b] => 213
[c] => 321
)Note that the order of the keys in the returned array is the same as the order of the keys in the source array.
To sort by the second array, then you may do so through array_replace.
<?php
$array = array(
'two' => 'a',
'three' => 'b',
'one' => 'c',
);
$keyswant = array(
'one' => '',
'three' => '',
);
print_r(array_intersect_key(array_replace($keyswant, $array), $keyswant));
?>
Shows:
Array
(
[one] => c
[three] => b
)
Rather than:
Array
(
[three] => b
[one] => c
)[Editor's note: changed array_merge_recursive() to array_replace_recursive() to fix the script]
Here is a better way to merge settings using some defaults as a whitelist.
<?php
$defaults = [
'id' => 123456,
'client_id' => null,
'client_secret' => null,
'options' => [
'trusted' => false,
'active' => false
]
];
$options = [
'client_id' => 789,
'client_secret' => '5ebe2294ecd0e0f08eab7690d2a6ee69',
'client_password' => '5f4dcc3b5aa765d61d8327deb882cf99', // ignored
'client_name' => 'IGNORED', // ignored
'options' => [
'active' => true
]
];
var_dump(
array_replace_recursive($defaults,
array_intersect_key(
$options, $defaults
)
)
);
?>
Output:
array (size=4)
'id' => int 123456
'client_id' => int 789
'client_secret' => string '5ebe2294ecd0e0f08eab7690d2a6ee69' (length=32)
'options' =>
array (size=2)
'trusted' => boolean false
'active' => boolean trueIf you want an array that has no key value pairs added from the second array:
$new = array_intersect_key($b, $a) + $a;Note that the order of the keys in the returned array is the same as the order of the keys in the source array. eg:
<?php
$array = array(
'two' => 'a',
'three' => 'b',
'one' => 'c',
);
$keyswant = array(
'one' => '',
'three' => '',
);
print_r(array_intersect_key($array, $keyswant));
?>
Shows:
Array
(
[three] => b
[one] => c
)I have found the following helpful:
<?PHP
function array_merge_default($default, $data) {
$intersect = array_intersect_key($data, $default); //Get data for which a default exists
$diff = array_diff_key($default, $data); //Get defaults which are not present in data
return $diff + $intersect; //Arrays have different keys, return the union of the two
}
?>
It's use is like both of the functions it uses, but keeps defaults and _only_ defaults. It's designed for key arrays, and i'm not sure how it will work on numeric indexed arrays.
Example:
<?PHP
$default = array(
"one" => 1,
"two" => 2
);
$untrusted = array(
"one" => 42,
"three" => 3
);
var_dump(array_merge_default($default, $untrusted));
array(2) {
["two"]=>
int(2)
["one"]=>
int(42)
}
?>Jesse: no, array_intersect_key does not accomplish the same thing as what you posted:
array_flip (array_intersect (array_flip ($a), array_flip ($b)))
because when the array is flipped, values become keys. having duplicate values is not a problem, but having duplicate keys is. array_flip resolves it by keeping only one of the duplicates and discarding the rest. by the time you start intersecting, you've already lost information.Regarding php at keithtylerdotcom solution to emulate
<?php
$z = someFuncReturningAnArray()['some_key'];
?>
His recommended solution will still return an array. To get the value of a single key in an array returned by a function, simply add implode() to the recipe:
<?php
function someFuncReturningAnArray() {
return array(
'a' => 'b',
'c' => 'd',
'e' => 'f',
'g' => 'h',
'i' => 'j'
);
}
//traditional way
$temp = someFuncReturningAnArray();
$b = $temp['a'];
echo print_r($b, 1) . "\n----------\n";
//keithtylerdotcom one-line method
$b = array_intersect_key(someFuncReturningAnArray(), array('a'=>''));
echo print_r($b, 1) . "\n----------\n";
//better one line method
$b = implode('', array_intersect_key(someFuncReturningAnArray(), array('a'=>'')));
echo print_r($b, 1) . "\n----------\n";
?><?php
/**
* calculates intersection of two arrays like array_intersect_key but recursive
*
* @param array/mixed master array
* @param array array that has the keys which should be kept in the master array
* @return array/mixed cleand master array
*/
function myIntersect($master, $mask) {
if (!is_array($master)) { return $master; }
foreach ($master as $k=>$v) {
if (!isset($mask[$k])) { unset ($master[$k]); continue; } // remove value from $master if the key is not present in $mask
if (is_array($mask[$k])) { $master[$k] = $this->myIntersect($master[$k], $mask[$k]); } // recurse when mask is an array
// else simply keep value
}
return $master;
}
?>in case you came here looking for a function that returns an array containing the values of `all` arrays with intersecting keys:
<?php
function array_merge_on_key($key, $array1, $array2) {
$arrays = array_slice(func_get_args(), 1);
$r = array();
foreach($arrays as &$a) {
if(array_key_exists($key, $a)) {
$r[] = $a[$key];
continue;
}
}
return $r;
}
// example:
$array1 = array("id" => 12, "name" => "Karl");
$array2 = array("id" => 4, "name" => "Franz");
$array3 = array("id" => 9, "name" => "Helmut");
$array4 = array("id" => 10, "name" => "Kurt");
$result = array_merge_on_key("id", $array1, $array2, $array3, $array4);
echo implode(",", $result); // => 12,4,9,10
?>Just a simple script if you want to use one array, which contains only zeros and ones, as mask for another one (both arrays must have the same size of course). $outcome is an array that contains only those values from $source where $mask is equal to 1.
<?php
$outcome = array_values(array_intersect_key( array_values($source), array_filter(array_values($mask)) ));
?>
PS: the array_values() function is necessary to ensure that both arrays have the same numbering/keys, otherwise your masking does not behave as you expect.
Enjoy!