socket_read

(PHP 4 >= 4.1.0, PHP 5, PHP 7, PHP 8)

socket_read — Lê um máximo de bytes de um soquete

Descrição

socket_read(Socket $socket, int $length, int $mode = PHP_BINARY_READ): string|false

A função socket_read() lê da instância Socket, o socket criado pelas funções socket_create() ou socket_accept().

Parâmetros

socket

Uma instância de Socket criada com socket_create() ou socket_accept().

length

O número máximo de bytes lidos é especificado pelo parâmetro length. De outra forma, podem ser usados os caracteres \r, \n, ou \0 para encerrar a leitura (dependendo do parâmetro mode, veja abaixo).

mode

O parâmetro opcional mode é uma constante nomeada:

PHP_BINARY_READ (Padrão) - usa a função de sistema recv(). Segura para ler dados binários.
PHP_NORMAL_READ - a leitura é interrompida em \n ou \r.

Valor Retornado

socket_read() retorna os dados como uma string em caso de sucesso, ou false em caso de erro (inclusive se o servidor remoto tiver fechado a conexão). O código de erro pode ser recuperado com socket_last_error(). Este código pode ser passado para socket_strerror() para obter uma representação textual do erro.

Nota:
socket_read() retorna uma string de comprimento zero ("") quando não houver mais dados para leitura.

Registro de Alterações

Versão	Descrição
8.0.0	O parâmetro `socket` agora espera uma instância de Socket; anteriormente, um resource era esperado.

Veja Também

socket_accept() - Aceita uma conexão em um soquete
socket_bind() - Vincula um nome a um soquete
socket_connect() - Inicia uma conexão em um soquete
socket_listen() - Escuta uma conexão em um soquete
socket_last_error() - Retorna o último erro no soquete
socket_strerror() - Retorna uma string descrevendo um erro no soquete
socket_write() - Escreve em um soquete

Melhore Esta Página

Aprenda Como Melhorar Esta Página • Envie uma Solicitação de Modificação • Reporte um Problema

＋adicione uma nota

Notas Enviadas por Usuários (em inglês) 21 notes

down

cottton at i-stats dot net ¶

10 years ago

quote:
"Note:
socket_read() returns a zero length string ("") when there is no more data to read."

This is not true!

In a while loop  
(example case few bytes to receive - just enough for 1 call, but you use a loop to be sure you received all data)
if you use 
<? socket_set_block($socket); ?>
you will get:
1st call in loop: data
2nd call in loop: a block forever, if there isnt data anymore or w/e happen to the "other side"

So ofc you want to use 
<? socket_set_nonblock($socket); ?>
and you will get:
1st call in loop: data
2nd call in loop: socket_read() returns FALSE (bool) and socket_last_error() gives you a SOCKET_EWOULDBLOCK (http://de1.php.net/manual/de/sockets.constants.php)

There is not a single time i got a empty string back from socket_read.
And im "working" on this problem(bug?) since a week or so.

You better use socket_recv() instead.
(good luck)

down

Anonymous ¶

22 years ago

Windows telnet sends/recieves one character at a time. Try adding PHP_NORMAL_READ to the end of socket_read, that might help.

down

nuitari-php at nuitari dot net ¶

17 years ago

PHP_NORMAL_READ - reading stops at \n or \r.

This seems to be meant literally.
If there is a \r, then it will stop reading, even if there is a \n right after it. You have to call the read again just to get rid of the \n.

down

dotpointer ¶

17 years ago

PHP 5.2.0 / Win32 / Apache 1.3 - It seems like...

PHP_BINARY_READ - works, but returns '', not FALSE...
- is blocking, until data received or connection closed
- does pass-through \r\n etc.
- returns data on data, '' on connection closed
- you can detect closed connection by checking for '' (not FALSE as stated i manual)

PHP_NORMAL_READ - not working so good...
- is non-blocking
- does not pass-through \r\n etc.
- returns false on no-data, false on connection closed :(
- (no way here to detect a closed connection...?)
- (is this a bug? http://bugs.php.net/bug.php?id=21880 )
- (is this a bug? http://bugs.php.net/bug.php?id=21197 )
- (could not get data from this option at all in fact...)

PHP_BINARY_READ seems to be the "right way to go" 
for now. Both checking for '' and false to detect closed 
connection is probably smart, as this "bug"(?) may 
be fixed...

down

d dot bergloev at gmail dot com ¶

4 years ago

Binary read is the correct way to read data in most cases, whereas "normal read", is a strange and lazy PHP built mode, that works mostly with terminal data. 

If you want to keep track of closed connections with binary read, the correct way is NOT to switch from binary to "normal", like some suggests. The correct way is to create some test scenarios and see how PHP deals with specific circumstances. 

Here is what a quick test shows, when working with non-blocking sockets. 

<?php
$input = socket_read($socket, 1024);

// In most cases, error produces an empty string and not FALSE
if ($input === FALSE || strcmp($input, '') == 0) {
    $code = socket_last_error($socket);

    // You MUST clear the error, or it will not change on next read
    socket_clear_error($socket);

    if ($code == SOCKET_EAGAIN) {
        // Nothing to read from non-blocking socket, try again later...

    } else {
        // Connection most likely closed, especially if $code is '0'
    }

} else {
    // Deal with the data
}
?>

There are more errors to consider, but this will get you started.

down

michi at tr51 dot org ¶

20 years ago

if you'd like to make a "socket_read" on a linux-system connected with a flash-client (v. 6.0 r81) you have to send a string to the connected port:

<?php

   ...  //initialising communication

    $string = "ready to get/send data\0"; 
    socket_write($socket, $string);

    //now you can read from...
    $line = trim(socket_read($socket, MAXLINE));

    ...  // do some stuff, finaly close connection
?>

down

berniev ¶

7 years ago

It is not obvious from the docs or notes...
PHP_NORMAL_MODE is different to PHP_BINARY in that the former blocks regardless of socket_set_nonblock, the latter respects block and nonblock.

down

Anonymous ¶

16 years ago

On non-blocking connections it may not return full length requested.

down

dhaubert dot ti at gmail dot com ¶

9 years ago

A way to wait for a message response by the socket or take the first message incoming.

Note that if the server turn offline, you have a socket resource, but while trying socket_read(), it gives you a warning message that will fill your hard drive kickly due to logging.

The example above try read the message at best 3 times, 3 seconds sleeping for another reading. 
<?php
function waitResponse($response = "") {
   $status = "";
   $tries = 3;
   $counter = 0;
   while ($status == $response) {
            $status = socket_read($socket, 1024);
            if(!$status){
               if($counter >= $tries){
                  break;
               }else{
                  $counter++;
                  sleep(3);
               }
            }
   }
return $response;
}

down

eng.mrkto.com ¶

13 years ago

It seems like in socket_* functions in BLOCKING mode where is no way to check if more than $length bytes are still available in socket (like stream_get_meta_data()['unread_bytes']).
So you need to choose your prefered maximum $length (like 133693415:) or use non-blocking mode (for realy big data reciving).

down

t33th4n at gmail dot com ¶

15 years ago

I don't know if is it stated anywhere with this clearance, but here is the source code for detecting the connection abort/closure for sockets testing with socket_read function:



<?php

$buf = @socket_read($routes[$i][$connectionid]['tunnelsrc'], $buffer_size);

if ($buf === '')

{

    $routes[$i][$connectionid]['disconnected']='Conenction abort at source side';

}

?>



($buf === '') is the key :)



I was making an ecrypted tunnel script with mcrypt and was annoying that i could not detect the connection abort from any side.

down

tech [{at}] swatcash [{dot}] com ¶

16 years ago

Messed up the end of my previous one. Corrected version here: 

a simple work around to non-blocking working with normal read is like so:

$read = array($socket);
$write  = NULL;
$except = NULL;
while(1) {
    $num_changed_sockets = socket_select($read, $write, $except, 0, 1);
    if ( $num_changed_sockets > '0' ) {
        socket_read($socket,10000,PHP_NORMAL_READ);
    } 
}

down

nad0r1 at hush dot ai ¶

17 years ago

Another way to bypass the annoying thing with telnet, that send each character as a string ,is to check if the response is "\r\n", that is the string that telnet sends when the user presses enter.

Here is an example:
<?php
error_reporting(E_ALL);

/* Allow the script to hang around waiting for connections. */
set_time_limit(0);

/* Turn on implicit output flushing so we see what we're getting
 * as it comes in. */
ob_implicit_flush();

$address = '127.0.0.1';
$port = 100;

if (($sock = socket_create(AF_INET, SOCK_STREAM, SOL_TCP)) === false) {
    echo "socket_create() failed: reason: " . socket_strerror(socket_last_error()) . "\n";
}

if (socket_bind($sock, $address, $port) === false) {
    echo "socket_bind() failed: reason: " . socket_strerror(socket_last_error($sock)) . "\n";
}
else 
  echo 'Socket ' . $address . ':' . $port . " has been opened\n";

if (socket_listen($sock, 5) === false) {
    echo "socket_listen() failed: reason: " . socket_strerror(socket_last_error($sock)) . "\n";
}
else 
   echo "Listening for new clients..\n";

   $client_id = 0;
do {
    if (($msgsock = socket_accept($sock)) === false) {
        echo "socket_accept() failed: reason: " . socket_strerror(socket_last_error($sock)) . "\n";
        break;
    }
    else {
        $client_id += 1;
      echo "Client #" .$client_id .": Connect\n";
    }
      
    /* Send instructions. */
    $msg = "\nWelcome to the PHP Test Server. \n" .
        "To quit, type 'quit'. To shut down the server type 'shutdown'.\n";
    socket_write($msgsock, $msg, strlen($msg));
$cur_buf = '';
    do {
        if (false === ($buf = socket_read($msgsock, 2048))) {
            echo "socket_read() failed: reason: " . socket_strerror(socket_last_error($msgsock)) . "\n";
            break 2;
        }
        if ($buf == "\r\n") {
        if ($cur_buf == 'quit') {
            echo 'Client #' .$client_id .': Disconnect' . "\n";
            break;
        }
        if ($cur_buf == 'shutdown') {
            socket_close($msgsock);
            break 2;
        }
        //else {
       $talkback = "Unknown command: " . str_replace("\r\n", '\r\n', $cur_buf) ."\n";
       socket_write($msgsock, $talkback, strlen($talkback));
       // }
        echo 'Client #' .$client_id .': ' . $cur_buf . "\n"; 
        $cur_buf = '';
        }
        else $cur_buf .= $buf;
    } while (true);
    socket_close($msgsock);
} while (true);

socket_close($sock);
?>

down

Niels laukens ¶

18 years ago

This paragraph is confusing:

socket_read() returns the data as a string on success, or FALSE on error (including if the remote host has closed the connection). The error code can be retrieved with socket_last_error(). This code may be passed to socket_strerror() to get a textual representation of the error.
Note: socket_read() returns a zero length string ("") when there is no more data to read.

My tests (on PHP 5.1.4) show that when you socket_read() on a shutdown-socket, it returns FALSE when using PHP_NORMAL_READ, but returns "" when reading in PHP_BINARY_READ.

down

schst at php-tools dot de ¶

21 years ago

You may download a generic server class at http://www.php-tools.de
This class will accept the sockets read data from it and hands it to a callback function. Furthermore there are methods for connection handling included.

down

-1

Arvy ¶

6 years ago

On non-blocking sockets, the function will return "" if no data is received, and even if the client disconnects.

If you want to check if the client disconnected, use ===.

$ret=socket_read($socket);

$ret=="" : connected but no data received or client disconnected
$ret==="" : client disconnected for sure

down

-1

sahel dot nuri at outlook dot com ¶

7 years ago

This little, important fact would save your time.
If you want to recognize that your client is disconnected without any message, you have to select the right flag.
Because, if you use the flag PHP_BINARY_READ:
<?php
function read($sock){
    while($buf = @socket_read($sock, 1024 [, PHP_BINARY_READ ]))
        if($buf = trim($buf))
            break;

    return $buf;
}
?>
and the users disconnects, the function will returns an empty string.
But if you use the flag PHP_NORMAL_READ:
<?php
function read($sock){
    while($buf = @socket_read($sock, 1024, PHP_NORMAL_READ))
        if($buf = trim($buf))
            break;

    return $buf;
}
?>
the function will returns a false.

I hope this will help you. I wasted one hour of my time to solve this problem.

down

-1

Bill Kuker ¶

19 years ago

Just a note that on my system the length seems to have an undocumented upper bound of 65536. I was being lazy and not read()ing in a while loop until I pointed it at real data ;)

down

-2

ein at anti-logic dot com ¶

17 years ago

the proper way to detect a closed connection is to check socket_last_error.

Connection reset by peer is 104 (either use socket_strerror or don't suppress errors for the time being to find these out), sooo.

while($buffer=@socket_read($sock,512,PHP_NORMAL_READ)){
    echo $buffer;
}
if(socket_last_error($sock) == 104) {
    echo "Connection closed";
}

down

-1

magicking89 at hotmail dot com ¶

21 years ago

if you want to use a non block socket you must to use socket_last_error

if(!socket_last_error($sc)){
   if($buffer=socket_read($sc,512,PHP_NORMAL_READ)){
      echo $buffer;
   }
}

if you use it your script wont take all your memory

down

-4

jgbustos at gmail dot com ¶

17 years ago

PHP on win32 developers, please look at this bug report before using the PHP_NORMAL_READ option:

http://bugs.php.net/bug.php?id=21197

In a nutshell, using PHP_NORMAL_READ will make your calls to socket_read() return an empty buffer every time.

＋adicione uma nota