PHP Conference Nagoya 2025

bindec

(PHP 4, PHP 5, PHP 7, PHP 8)

bindec2 進数 を 10 進数に変換する

説明

bindec(string $binary_string): int|float

引数 binary_string により指定された 2 進数と等価な 10 進数を返します。

bindec() は、2 進数を int に変換します。 サイズの問題により、必要に応じて float となることもあります。

bindec() は、すべての binary_string 値を符号なし整数として扱います。 これは、bindec() が最上位ビットを 符号ビットではなく別の桁とみなすからです。

パラメータ

binary_string

変換したい 2 進数文字列。 binary_string に無効な文字を与えても、静かに無視されます。 PHP 7.4.0 以降では、無効な文字を与えることは推奨されません。

警告

このパラメータは文字列でなければなりません。 他のデータ型を使用すると、予期せぬ結果となります。

戻り値

binary_string を 10 進に変換した値を返します。

変更履歴

バージョン 説明
7.4.0 無効な文字を与えると、非推奨の警告が出るようになりました。 結果は不正な文字がなかったかのように計算されます。

例1 bindec() の例

<?php
echo bindec('110011') . "\n";
echo
bindec('000110011') . "\n";

echo
bindec('111');
?>

上の例の出力は以下となります。

51
51
7

例2 bindec() が入力を符号なし整数として処理する例

<?php
/*
* The lesson from this example is in the output
* rather than the PHP code itself.
*/

$magnitude_lower = pow(2, (PHP_INT_SIZE * 8) - 2);
p($magnitude_lower - 1);
p($magnitude_lower, 'See the rollover? Watch it next time around...');

p(PHP_INT_MAX, 'PHP_INT_MAX');
p(~PHP_INT_MAX, 'interpreted to be one more than PHP_INT_MAX');

if (
PHP_INT_SIZE == 4) {
$note = 'interpreted to be the largest unsigned integer';
} else {
$note = 'interpreted to be the largest unsigned integer
(18446744073709551615) but skewed by float precision'
;
}
p(-1, $note);


function
p($input, $note = '') {
echo
"input: $input\n";

$format = '%0' . (PHP_INT_SIZE * 8) . 'b';
$bin = sprintf($format, $input);
echo
"binary: $bin\n";

ini_set('precision', 20); // For readability on 64 bit boxes.
$dec = bindec($bin);
echo
'bindec(): ' . $dec . "\n";

if (
$note) {
echo
"NOTE: $note\n";
}

echo
"\n";
}
?>

上の例の 32 ビットマシンでの出力は、このようになります。

input:        1073741823
binary:       00111111111111111111111111111111
bindec():     1073741823

input:        1073741824
binary:       01000000000000000000000000000000
bindec():     1073741824
NOTE:         See the rollover?  Watch it next time around...

input:        2147483647
binary:       01111111111111111111111111111111
bindec():     2147483647
NOTE:         PHP_INT_MAX

input:        -2147483648
binary:       10000000000000000000000000000000
bindec():     2147483648
NOTE:         interpreted to be one more than PHP_INT_MAX

input:        -1
binary:       11111111111111111111111111111111
bindec():     4294967295
NOTE:         interpreted to be the largest unsigned integer

上の例の 64 ビットマシンでの出力は、このようになります。

input:        4611686018427387903
binary:       0011111111111111111111111111111111111111111111111111111111111111
bindec():     4611686018427387903

input:        4611686018427387904
binary:       0100000000000000000000000000000000000000000000000000000000000000
bindec():     4611686018427387904
NOTE:         See the rollover?  Watch it next time around...

input:        9223372036854775807
binary:       0111111111111111111111111111111111111111111111111111111111111111
bindec():     9223372036854775807
NOTE:         PHP_INT_MAX

input:        -9223372036854775808
binary:       1000000000000000000000000000000000000000000000000000000000000000
bindec():     9223372036854775808
NOTE:         interpreted to be one more than PHP_INT_MAX

input:        -1
binary:       1111111111111111111111111111111111111111111111111111111111111111
bindec():     18446744073709551616
NOTE:         interpreted to be the largest unsigned integer
              (18446744073709551615) but skewed by float precision

注意

注意:

この関数は、プラットフォームの int 型に収まらない大きな数も変換できます。 その場合、結果は float で返します。

参考

  • decbin() - 10 進数を 2 進数に変換する
  • octdec() - 8 進数を 10 進数に変換する
  • hexdec() - 16 進数を 10 進数に変換する
  • base_convert() - 数値の基数を任意に変換する

add a note

User Contributed Notes 10 notes

up
7
info at rickdg dot nl
14 years ago
Two functions to convert 16bit or 8bit binary to integer using two's complement. If input exceeds maximum bits, false is returned. Function is easily scalable to x bits by changing the hexadecimals.

<?php function _bin16dec($bin) {
// Function to convert 16bit binary numbers to integers using two's complement
$num = bindec($bin);
if(
$num > 0xFFFF) { return false; }
if(
$num >= 0x8000) {
return -((
$num ^ 0xFFFF)+1);
} else {
return
$num;
}
}

function
_bin8dec($bin) {
// Function to convert 8bit binary numbers to integers using two's complement
$num = bindec($bin);
if(
$num > 0xFF) { return false; }
if(
$num >= 0x80) {
return -((
$num ^ 0xFF)+1);
} else {
return
$num;
}
}
?>
up
3
martin at punix dot de
21 years ago
## calculate binary with "shift-method" ##

<?php
function dec2bin($decimal_code){
for(
$half=($decimal_code);$half>=1;$half=(floor($half))/2){
if((
$half%2)!=0){
$y.=1;
}
else{
$y.=0;
}
}
$calculated_bin=strrev($y);
return
$calculated_bin;
}
?>

## example ##

[bin] 123 = [dec] 1111011

e.g.
123/2 = 61,5 => 1
61/2 = 30,5 => 1
30/2 = 15 => 0
15/2 = 7,5 => 1
7/2 = 3,5 => 1
3/2 = 1,5 => 1
1/2 = 0,5 => 1
(0/2 = 0 finish)
up
3
gwbdome at freenet dot de
20 years ago
i think a better method than the "shift-method" is my method ^^...
here it comes:

function convert2bin($string) {
$finished=0;
$base=1;
if(preg_match("/[^0-9]/", $string)) {
for($i=0; $string!=chr($i); $i++);
$dec_nr=$i;
}
else $dec_nr=$string;
while($dec_nr>$base) {
$base=$base*2;
if($base>$dec_nr) {
$base=$base/2;
break;
}
}
while(!$finished) {
if(($dec_nr-$base)>0) {
$dec_nr=$dec_nr-$base;
$bin_nr.=1;
$base=$base/2;
}
elseif(($dec_nr-$base)<0) {
$bin_nr.=0;
$base=$base/2;
}
elseif(($dec_nr-$base)==0) {
$bin_nr.=1;
$finished=1;
while($base>1) {
$bin_nr.=0;
$base=$base/2;
}
}
}
return $bin_nr;
}

=====================================================

if you want to reconvert it (from binary to string or integer) you can use this function:

function reconvert($bin_nr) {
$base=1;
$dec_nr=0;
$bin_nr=explode(",", preg_replace("/(.*),/", "$1", str_replace("1", "1,", str_replace("0", "0,", $bin_nr))));
for($i=1; $i<count($bin_nr); $i++) $base=$base*2;
foreach($bin_nr as $key=>$bin_nr_bit) {
if($bin_nr_bit==1) {
$dec_nr+=$base;
$base=$base/2;
}
if($bin_nr_bit==0) $base=$base/2;
}
return(array("string"=>chr($dec_nr), "int"=>$dec_nr));
}
up
2
Nitrogen
15 years ago
Binary to Decimal conversion using the BCMath extension..

<?php

function BCBin2Dec($Input='') {
$Output='0';
if(
preg_match("/^[01]+$/",$Input)) {
for(
$i=0;$i<strlen($Input);$i++)
$Output=BCAdd(BCMul($Output,'2'),$Input{$i});
}
return(
$Output);
}

?>

This will simply convert from Base-2 to Base-10 using BCMath (arbitrary precision calculation).

See also: my 'BCDec2Bin' function on the 'decbin' document.
Enjoy,
Nitrogen.
up
1
alan hogan dot com slash contact
17 years ago
The "smartbindec" function I wrote below will convert any binary string (of a reasonable size) to decimal. It will use two's complement if the leftmost bit is 1, regardless of bit length. If you are getting unexpected negative answers, try zero-padding your strings with sprintf("%032s", $yourBitString).

<?php
function twoscomp($bin) {
$out = "";
$mode = "init";
for(
$x = strlen($bin)-1; $x >= 0; $x--) {
if (
$mode != "init")
$out = ($bin[$x] == "0" ? "1" : "0").$out;
else {
if(
$bin[$x] == "1") {
$out = "1".$out;
$mode = "invert";
}
else
$out = "0".$out;
}
}
return
$out;
}
function
smartbindec($bin) {
if(
$bin[0] == 1)
return -
1 * bindec(twoscomp($bin));
else return (int)
bindec($bin);
}
?>
up
0
patrick dot boens at latosensu dot be
12 years ago
Left-shift a string by a number of bytes
<?php
function STR_shl( $szStr,$nBits )
/*-----------------------------*/
{
if (
$nBits < 1 || $nBits > 7 ) /* If not adequate number of bits */
{
return (
$szStr ); /* Return the original string */
} /* if ( $nBits < 1 || $nBits > 7 ) */

if ( ( $iLength = strlen( $szStr ) ) <= 0 ) /* If string empty */
{
return (
$szStr ); /* Return the original string */
} /* if ( ( $iLength = strlen( $szStr ) ) <= 0 ) */

$szRetVal = ''; /* Create an empty string */

$szBits = STR_Binary( $szStr ); /* $szStr in bits */
$szLostBits = STR_Left( $szBits,$nBits ); /* The $nBits leftmost bits of the string */
$szShifted = substr( $szBits,$nBits ) . $szLostBits; /* $szStr left shifted */

for ( $i = 0;$i < $iLength;$i++ ) /* Treat the entire string (per slice of 8 bits) */
{
$szRetVal .= chr( bindec( substr( $szShifted,$i * 8,8 ) ) ); /* Concatenate the CHR to the result string */
} /* for ( $i = 0;$i < $iLength;$i++ ) */

return ( $szRetVal ); /* Return result to caller */
}
?>

Right-shift a string by a number of bytes
<?php

function STR_shr( $szStr,$nBits )
/*-----------------------------*/
{
if (
$nBits < 1 || $nBits > 7 ) /* If not adequate number of bits */
{
return (
$szStr ); /* Return the original string */
} /* if ( $nBits < 1 || $nBits > 7 ) */

if ( ( $iLength = strlen( $szStr ) ) <= 0 ) /* If string empty */
{
return (
$szStr ); /* Return the original string */
} /* if ( ( $iLength = strlen( $szStr ) ) <= 0 ) */

$szRetVal = ''; /* Create an empty string */

$szBits = STR_Binary( $szStr ); /* $szStr in bits */
$szLostBits = STR_Right( $szBits,$nBits ); /* The $nBits rightmost bits of the string */
$szShifted = $szLostBits . substr( $szBits,0,-$nBits ); /* $szStr right shifted */

for ( $i = 0;$i < $iLength;$i++ ) /* Treat the entire string (per slice of 8 bits) */
{
$szRetVal .= chr( bindec( substr( $szShifted,$i * 8,8 ) ) ); /* Concatenate the CHR to the result string */
} /* for ( $i = 0;$i < $iLength;$i++ ) */

return ( $szRetVal ); /* Return result to caller */
}
?>

Additional functions used by the two preceding:
<?php
function STR_Binary( $szStr )
/*-------------------------*/
{
$szRetVal = ''; /* Ready to return an empty string */

if ( ( $iLength = strlen( $szStr ) ) > 0 ) /* If string NOT empty */
{
for (
$i = 0; $i < $iLength;$i++ ) /* Treat each character of the string */
{
$szRetVal .= sprintf( '%08b',ord( $szStr[$i] ) ); /* Turn this char to a binary representation (8 bits) */
} /* for ( $i = 0; $i < $iLength;$i++ ) */
} /* if ( ( $iLength = strlen( $szStr ) ) > 0 ) */

return ( $szRetVal ); /* Return result to caller */
}

function
STR_Left( $szStr,$iCount = 1 )
/*----------------------------------*/
{
return
substr( $szStr,0,$iCount );
}
/* End of function strleft() */

function STR_Right( $szString,$iCount )
/*----------------------------------*/
{
return
substr( $szString,0 + strlen( $szString ) - $iCount,$iCount );
}
?>
up
-1
mashematician at gmail dot com
16 years ago
A binary to decimal conversion function that takes advantage of the BC library functions to return decimal values of arbitrary length.

Input type must be a string in order to work properly.

<?php

function binary_to_decimal($a) {
$bin_array = str_split($a);

$y=sizeof($bin_array)-1;
for (
$x=0; $x<sizeof($bin_array)-1; $x++) {
if (
$bin_array[$x] == 1) {
$bin_array[$x] = bcpow(2, $y);
}
$y--;
}

for (
$z=0; $z<sizeof($bin_array); $z++) {
$result = bcadd($result, $bin_array[$z]);
}
echo
$result;
}

binary_to_decimal('11111');

?>
up
-1
jpfstange at gmail dot com
8 years ago
<?php

//binfloat (For single precision floating point numbers)
//IEE754
//https://en.wikipedia.org/wiki/Single-precision_floating-point_format

function binfloat(Array $num){

$sign = $num[0] ? 1 : -1; //1 bit
$exponent = pow(2,bindec(implode('',array_slice($num,1,8)))-127);
$fraction = array_slice($num,9,count($num)); //23 bits
$fracSum = 1;

for(
$i=0;$i<23;$i++){

$fracSum += $fraction[$i] * pow(2,-1-$i);

}

return
$fracSum*$exponent;

}

$num = isset($_GET['num']) ? $_GET['num'] : '00111110001000000000000000000000';

if(
strlen($num)<32){

echo
"Invalid binary number $num\n";
exit(
1);

}

$num = str_split($num);

echo
sprintf('Num is: [%s]%s',implode('',$num),"\n");
echo
sprintf('Result is: %s%s',binfloat($num),"\n");
up
-1
flashpack at gmail dot com
16 years ago
for converting fractions :
eg : 1001.1101

<?php
function BinaryToDecimal($binary){
$binary=trim($binary);
if (
strstr($binary,'.')){
$split=explode('.',$binary);
$integer=$split[0];
$fraction=$split[1];

$digits=str_split($fraction);
$num=sizeof($digits);
for (
$i=1; $i<=$num;$i++){
if (
$digits[$i-1]>1){
echo
'<script>alert("Enter Binary Digits Only {0,1}\n \n eg: 11001 or 11001.011");history.go(-1)</script> ';
}
$exponent=pow(2,-$i);
$fraction_result+=$digits[$i-1]*$exponent;
}

}else{
$integer=$binary;
}

$splits=str_split($integer);
$num=sizeof($splits)-1;
$i=$num;
foreach(
$splits as $digits){
if (
$digits>1){
echo
'<script>alert("Enter Binary Digits Only {0,1}\n \n eg: 11001 or 11001.011");history.go(-1)</script> ';
}
$exponent=pow(2,$i);
$integer_result+=$digits*$exponent;
$i--;
}
if(
$fraction_result){
$result=$integer_result+$fraction_result;
}else {
$result=$integer_result;
}
return
$result ;
}
?>
up
-3
nodarinodo at mail dot ru
15 years ago
<?php
// bindecfunc :)))) I think it works well too :)
function bindecc($str)
{
$str = str_replace(" ", "", $str);
$strr = preg_match('/[^01]/', $str);
if(
$strr == 1) { return "<b> Error ! only 1 and 0;</b>"; }
$strsig = strlen($str);
$strr1 = strrev($str);
$strf = '';
for(
$i = $strsig; $i >= 0; $i--)
{
$strf += ($strr1[$i] * pow(2, $i));
#$strf += $str[$i];
}
return
$strf;
}
?>
To Top