xml_set_character_data_handler

(PHP 4, PHP 5, PHP 7, PHP 8)

xml_set_character_data_handler — Valorizza il gestore dei dati

Descrizione

xml_set_character_data_handler(resource $parser, callable $handler): bool

Imposta la funzione che gestisce i dati carattere per il parser XML parser.

Elenco dei parametri

parser

Un riferimento al parser XML per impostare la funzione che gestisce i dati carattere.

handler

handler è una stringa contenente il nome di una funzione che deve esistere quando xml_parse() è chiamata per parser.

La funzione indicata da handler deve accettare due parametri:

handler(resource $parser, string $data)

parser: Il primo parametro, parser, è un riferimento al parser XML che chiama il gestore.
data: Il secondo parametro, data, contiene i dati dei caratteri come stringa.

Il gestore dei dati carattere è chiamato per ogni pezzo di un testo nel documento XML. Può essere chiamato più volte all'interno di ogni frammento (ad esempio per stringhe non-ASCII).

Se una funzione del gestore è impostata con una stringa vuota, oppure a false, il gestore in questione viene disabilitato.

Nota: Invece di un nome di funzione, può essere passato anche un array contenente un riferimento ad oggetto e un nome di metodo.

Valori restituiti

Restituisce true in caso di successo, false in caso di fallimento.

Improve This Page

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 9 notes

down

flobee ¶

19 years ago

re. to Philippe Marc , and  karuna_gadde examples

i found out that the xml_set_character_data_handler call back  function can be called more often for the same element in particular the content is just a few chars long (happen on windows)

so a check up can give you the answer an may be for long strings too.
eg:
<?php
xml_set_character_data_handler($this->parser, "cdata");
//...
function cdata($parser, $cdata) {
// ...
if(isset($this->data[$this->currentItem][$this->currentField])) {
    $this->data[$this->currentItem][$this->currentField] .= $cdata;
} else {
    $this->data[$this->currentItem][$this->currentField] = $cdata;
}      
?>

down

jhill at live dot com ¶

16 years ago

To detect that concatenation of data is taking place, you can keep track of whether the last function call was to the data processing function.

e.g. using $this->inside_data variable below:



<?php

xml_set_element_handler($this->parser, "start_tag", "end_tag");

xml_set_character_data_handler($this->parser, "contents");



protected function contents($parser, $data)

{

    switch ($this->current_tag) {

            case "name":

                if ($this->inside_data)

                    $this->name .= $data; // need to concatenate data

                else

                    $this->name = $data;

                break;

         ...

    }

    $this->inside_data = true;

}



protected function start_tag($parser, $name)

{

    $this->current_tag = $name;

    $this->inside_data = false;

}

        

protected function end_tag() {

    $this->current_tag = '';

    $this->inside_data = false;

}

?>

down

ben at removethis emediastudios dotcom ¶

19 years ago

I too love the undocumented "splitting" functionality :-p.

Rather than concatinating the data based on whether or not the current tag name has changed from the previous tag name I suggest always concatinating like the following with the $catData variable being unset in the endElement function:

<?php

function endElement ($parser, $data) {
  global $catData;

  // Because we are at an element end we know any splitting is finished
  unset($GLOBALS['catData']);
}

function characterData ($parser, $data) {
  global $catData;

  // Concatinate data in case splitting is taking place
  $catData.=$data;

}

?>

This got me around a problem with data like the following where, because characterData is not called for empty tags, the previous and current tag names were the same even though splitting was not taking place.

<companydept>
<companydeptID></companydeptID>
<companyID>1</companyID>
<companydeptName></companydeptName>
</companydept>
<companydept>
<companydeptID></companydeptID>
<companyID>2</companyID>
<companydeptName></companydeptName>
</companydept>
<companydept>
<companydeptID></companydeptID>
<companyID>3</companyID>
<companydeptName></companydeptName>
</companydept>

down

unspammable-iain at iaindooley dot com ¶

18 years ago

re: jason at omegavortex dot com below, another way to deal with whitespace issues is:

        function charData($parser,$data)
        {
            $char_data = trim($data);

            if($char_data)
                $char_data = preg_replace('/  */',' ',$data);

            $this->cdata .= $char_data;
        }

This means that:

    <p>here is my text <a href="something">my text</a> 
    and here is some more after some spaces at the
    beginning of the line</p>

comes out properly. You could do further replacements if you want to deal with tabs in your files. i only ever use spaces. if you only use trim() then you would lose the space before the <a> tag above, but trim() is a good way to check for completely empty char data, then just replace more than one space with a single space. this will preserve a single space at the beginning and end of the cdata.

down

yaroukh at email dot cz ¶

19 years ago

It would be nice if someone could complete documentation of this function. I think that the "splitting" behaviour should (at least) be mentioned within the documentation, if not explained (please!). I'm not quite sure whether the cut comes after each 1024bytes/chars of data.

My experience looks as follows:
[xmlFile]
...
    <label>slo|?ka</label>
    <comment>koment|?&#345; slo?ky</comment>
...
[/xmlFile]
(Places where the character-data got splitted are marked with pipes. Plus there was latin small letter 'r' with caron instead of &#345;.)

Since the splitting is not mentioned in documentation one could assume that it is a bug; especially when you work with UTF-8 and the cuts come right before some special characters.
(Should the concatenating of $cData be considered to be the proper & 'final' way of processing character-data?)

Also I'd suggest to add another line in "Description" when fc has an alternate usage (instead of hiding it within the "Note" :o); in this particular case I'd prefer this:

Description:
bool xml_set_character_data_handler ( resource parser, callback handler )
bool xml_set_character_data_handler ( resource parser, object reference, method name )

... there are dozens of functions ofcourse where documentation works this way (I mean not mentioning the alternate usage in the "Description" part).

Have a nice day
  Yaroukh

down

Philippe Marc ¶

20 years ago

How to overide the 1024 characters limitation of xml_set_character_data_handler.
Took me some time to find out how to deal with that!

When calling a basic XML parser: 
$parseurXML = xml_parser_create();
xml_set_element_handler($parseurXML, "opentagfunction", "closetagfunction");
xml_set_character_data_handler($parseurXML, "textfunction");

The textfunction only receive 1024 characters at once, even if the text is 4000 characters long. In facts, the parser seems to split the data in pieces of 1024 characters. The way to handle that is to concatenate them.

example:
If you have an XML tag called UNIPROT_ABSTRACT containing a 4000 characters protein description:
function textfunction($parser, $text)
    {
     if ($last_tag_read=='UNIPROT_ABSTRACT') $uniprot.=$text;
    }
The function is called 4 times and receives 1024+1024+1024+928 characters that will be concatenated in the $uniprot variable using the ".=" concatenation fonction.

Easy to do, but not documented!

down

Brad dot Harrison at griffith dot edu dot au ¶

20 years ago

If you need to trim the white space for HTML code and don't rely on spaces for formatting text (if you are then it is time to use Style Sheets) then this code will come in very useful.

 $data=eregi_replace(">"."[[:space:]]+"."<","><",$data);
 $data=eregi_replace(">"."[[:space:]]+",">",$data);
 $data=eregi_replace("[[:space:]]+"."<","<",$data);

down

dan30odd08 at hotmail dot com ¶

20 years ago

I just want to mention that i ran into a problem when parsing an xml file using the character data handler. If you happen to have a string which is also an internal php function stored in your xml data file and you want to output it as a string the parser dosent seem to recognize it.
   I found a way around this problem. In my case i was storing a string with the value read. This would not allow me to output the data so to work around this problem i added a backslash for every character in the data element.

   e.g.      <xml>
    from    <element>read</element>
    to       <element>////read</element>

i dont know if anyone has ran into this problem or not but i thought i would just put it here just so in case someone is getting stuck with this.

down

ken at positive-edge dot com ¶

22 years ago

the function handler is called several times when it parses the character data.  It doesn't return the entire string as it suggests.  There are special exceptions that will always force the parser to stop scanning and call the character data handler.  This is when:

- The parser runs into an Entity Declaration, such as &amp; (&) or &apos; (?)
- The parser finishes parsing an entity
- The parser runs into the new-line character (\n)
- The parser runs into a series of tab characters (\t)

And perhaps others.

For instance, if we have this xml content:

<mytag name=?Ken Egervari? title=?Chief Technology Officer?>
    Ken has been Positive Edge&apos;s Chief Technology Officer for 2 years.
</mytag>

The parser will call the character data handler 6 times.  This is what will happen:

1    \n
2    \t
3    Ken has been Positive Edge
4    ?
5    s Chief Technology Officer for 2 years.
6    \n

I hope that helps people out.

＋add a note