mysqli_stmt::get_result

mysqli_stmt_get_result

(PHP 5 >= 5.3.0, PHP 7, PHP 8)

mysqli_stmt::get_result -- mysqli_stmt_get_result — Obtiene un conjunto de resultados de una sentencia preparada

Descripción

Estilo orientado a objetos

mysqli_stmt::get_result(): mysqli_result

Estilo por procedimientos

mysqli_stmt_get_result(mysqli_stmt $stmt): mysqli_result

Es llamada para devolver un conjunto de resultados de una consulta de sentencia preparada.

Parámetros

stmt: Sólo estilo por procediminetos: Un identificador de declaraciones devuelto por mysqli_stmt_init().

Valores devueltos

Devuelve un conjunto de resultados para consultas SELECT select, o false para otras consultas DML o en caso de fallo. La función mysqli_errno() se puede emplear para distinguir entre dos tipos de fallo.

Solo Controlador Nativo de MySQL

Disponible sólo con mysqlnd.

Ejemplos

Ejemplo #1 Estilo orientado a objetos

<?php 

$mysqli = new mysqli("127.0.0.1", "usuario", "contraseña", "world"); 

if($mysqli->connect_error)
{
    die("$mysqli->connect_errno: $mysqli->connect_error");
}

$consulta = "SELECT Name, Population, Continent FROM Country WHERE Continent=? ORDER BY Name LIMIT 1";

$sentencia = $mysqli->stmt_init();
if(!$sentencia->prepare($consulta))
{
    print "Falló la preparación de la sentencia\n";
}
else
{
    $sentencia->bind_param("s", $continente);

    $array_continentes = array('Europe','Africa','Asia','North America');

    foreach($array_continentes as $continente)
    {
        $sentencia->execute();
        $resultado = $sentencia->get_result();
        while ($fila = $resultado->fetch_array(MYSQLI_NUM))
        {
            foreach ($fila as $f)
            {
                print "$f ";
            }
            print "\n";
        }
    }
}

$sentencia->close();
$mysqli->close();
?>

Ejemplo #2 Estilo por procedimientos

<?php 

$enlace = mysqli_connect("127.0.0.1", "usuario", "contraseña", "world"); 

if (!$enlace)
{
    $error = mysqli_connect_error();
    $errno = mysqli_connect_errno();
    print "$errno: $error\n";
    exit();
}

$consulta = "SELECT Name, Population, Continent FROM Country WHERE Continent=? ORDER BY Name LIMIT 1";

$sentencia = mysqli_stmt_init($enlace);
if(!mysqli_stmt_prepare($sentencia, $consulta))
{
    print "Falló la preparación de la sentencia\n";
}
else
{
    mysqli_stmt_bind_param($stmt, "s", $continente);

    $array_continentes = array('Europe','Africa','Asia','North America');

    foreach($array_continentes as $continente)
    {
        mysqli_stmt_execute($sentencia);
        $resultado = mysqli_stmt_get_result($sentencia);
        while ($fila = mysqli_fetch_array($resultado, MYSQLI_NUM))
        {
            foreach ($fila as $f)
            {
                print "$f ";
            }
            print "\n";
        }
    }
}
mysqli_stmt_close($sentencia);
mysqli_close($enlace);
?>

El resultado de los ejemplos sería:

Albania 3401200 Europe 
Algeria 31471000 Africa 
Afghanistan 22720000 Asia 
Anguilla 8000 North America

Ver también

mysqli_prepare() - Prepara una sentencia SQL para su ejecución
mysqli_stmt_result_metadata() - Devuelve los metadatos del conjunto de resultados de una sentencia preparada
mysqli_stmt_fetch() - Obtiene los resultados de una sentencia preparadas en las variables vinculadas
mysqli_fetch_array() - Obtiene una fila de resultados como un array asociativo, numérico, o ambos
mysqli_stmt_store_result() - Transfiere un conjunto de resultados desde una sentencia preparada
mysqli_errno() - Devuelve el código del error de la última función llamada

Improve This Page

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 6 notes

down

Anonymous ¶

11 years ago

I went through a lot of trouble on a server where mysqlnd wasn't available, and had a lot of headaches.

If you don't have mysqlnd installed/loaded whatever, you will get an undefined reference when trying to call "mysqli_stmt_get_result()".

I wrote my own mysqli_stmt_get_result() and a mysqli_result_fetch_array() to go with it.

<?php
class iimysqli_result
{
    public $stmt, $nCols;
}    

function iimysqli_stmt_get_result($stmt)
{
    /**    EXPLANATION:
     * We are creating a fake "result" structure to enable us to have
     * source-level equivalent syntax to a query executed via
     * mysqli_query().
     *
     *    $stmt = mysqli_prepare($conn, "");
     *    mysqli_bind_param($stmt, "types", ...);
     *
     *    $param1 = 0;
     *    $param2 = 'foo';
     *    $param3 = 'bar';
     *    mysqli_execute($stmt);
     *    $result _mysqli_stmt_get_result($stmt);
     *        [ $arr = _mysqli_result_fetch_array($result);
     *            || $assoc = _mysqli_result_fetch_assoc($result); ]
     *    mysqli_stmt_close($stmt);
     *    mysqli_close($conn);
     *
     * At the source level, there is no difference between this and mysqlnd.
     **/
    $metadata = mysqli_stmt_result_metadata($stmt);
    $ret = new iimysqli_result;
    if (!$ret) return NULL;

    $ret->nCols = mysqli_num_fields($metadata);
    $ret->stmt = $stmt;

    mysqli_free_result($metadata);
    return $ret;
}

function iimysqli_result_fetch_array(&$result)
{
    $ret = array();
    $code = "return mysqli_stmt_bind_result(\$result->stmt ";

    for ($i=0; $i<$result->nCols; $i++)
    {
        $ret[$i] = NULL;
        $code .= ", \$ret['" .$i ."']";
    };

    $code .= ");";
    if (!eval($code)) { return NULL; };

    // This should advance the "$stmt" cursor.
    if (!mysqli_stmt_fetch($result->stmt)) { return NULL; };

    // Return the array we built.
    return $ret;
}
?>

Hope this helps someone.

down

Anon ¶

6 years ago

Please OH PLEASE.
I have been trying to get a result set from this function, and I had 0 luck completely, for nearly 3 hours!

If you ARE using mysqli_stmt_get_results() to get a result set, in conjuction with mysqli_stmt_store_results in order to retrieve the number of rows returned, you are going to have some major trouble!

PHP Documentation states that to retrieve the number of rows returned by a prepared select sql statement, one should call the following statements respectively:

mysqli_stmt_execute($stmt);
mysqli_stmt_store_result($stmt);
$num_rows = mysqli_stmt_num_rows($stmt);

THIS IS A MAJOR DEATH TRAP, IF YOU ARE USING mysqli_stmt_get_result() in conjunction!!!! Results of doing so vary depending which statements you call first, but in the end, you will NOT get the desired result.

In conclusion, please, PLEASE, NEVER use mysqli_stmt_store_result(), then mysqli_ AND mysqli_stmt_get_result() at the the same time. This is a MAJOR death trap.

SOLUTION:
If you are trying to get a result set, and you need the number of rows returned at the same time, use the following statements respectively instead:

$result_set = mysqli_stmt_get_results($stmt);
$num_rows = mysqli_num_rows($result_set);

Reflecting on my actions, this solution may seem fairly obvious. However, to someone new using PHP (like me) or someone who is not fully comfortable with prepared statements, it's very easy to get lost by using Google and learn on your own.

Summary:
NEVER use mysqli_stmt_store_result($stmt) & mysqli_stmt_num_rows($stmt) in conjunction with mysqli_stmt_get_result($stmt). You will regret it!! I have been stuck on this for hours, and Google offered me no answer!

down

jeffspicer at gmail dot com ¶

6 years ago

To prevent others from hours of screaming trying to figure out why this does not work when you have the native driver enabled.  It is because you need to make sure you enable both native drives mysqlnd and nd_mysqli on your server if you wish to use this functionality.

Otherwise just enabling the mysqlnd native driver does include the mysqli_stmt_get_result function as this apparently resides in the nd_mysqli native driver.  Unfortunately, most documentation only ever talks about the mysqlnd native driver.

Once you enable both native drivers this function works as documented.

down

jari dot wiklund at gmail dot com ¶

13 years ago

Please note that this method requires the mysqlnd driver. Othervise you will get this error: Call to undefined method mysqli_stmt::get_result()

down

Haravikk ¶

8 years ago

For those interested, this function seems to always produce a stored result, making it equivalent to mysqli::store_result(), rather than fetching on demand as in the case of mysqli::use_result().

This is important as it means that you cannot control the nature of the result as you would normally by calling mysqli_stmt::store_result() prior to fetching, as I had personally expected.

So, if you want to emulate the behaviour of mysqli::use_result() you will still need to use mysqli_stmt::bind_param() and mysqli_stmt::fetch().

down

HeadlessDev ¶

5 years ago

Thanks to everyone that leaves notes, without them I would not be able to do what I do. I wrote this function with help from notes on this page and others.

I did not have mysqlnd available to me, but wanted to be able to get_result() of a query as an object.

PLEASE NOTE: I am not an expert at PHP

Heres an example of using my get_result() to login users
<?php
    //Sanitize input before using this function
    function login($email, $password){
        require 'connect_db.php';
        $query = $sql->stmt_init();
        if($query->prepare("SELECT CustomerId, Password, Admin FROM users WHERE Email = ?")){
            $query->bind_param("s",$email);
            $result = get_result($query); //USING FUNCTION  HERE
            if($result != NULL){
                $user = $result[0];
                if(password_verify($password, $user->Password)){
                    $_SESSION['user_id'] = $user->CustomerId;
                    if($user->Admin == 1){
                        $_SESSION['admin'] = true;
                    }
                    $sql->close();
                    return true;
                }
            }
        }
        $sql->close();
        //If we get here they are not logged in
        return false;
    }

    //Returns an array with each row as an object
    function get_result($stmt){
        $stmt->execute(); //Execute query
        $stmt->store_result(); //Store the results
        $num_rows = $stmt->num_rows; //Get the number of results
        $results = NULL;
        if($num_rows > 0){
            //Get metadata about the results
            $meta = $stmt->result_metadata();
            //Here we get all the column/field names and create the binding code
            $bind_code = "return mysqli_stmt_bind_result(\$stmt, ";
            while($_field = $meta->fetch_field()){
                $bind_code .= "\$row[\"".$_field->name."\"], ";
            }
            //Replace trailing ", " with ");"
            $bind_code = substr_replace($bind_code,");", -2);
           //Run the code, if it doesn't work return NULL
            if(!eval($bind_code)) { 
                $stmt->close(); 
                return NULL;
            }
            //This is where we create the object and add it to our final result array
            for($i=0;$i<$num_rows;$i++){
               //Gets the row by index
                $stmt->data_seek($i);
                //Update bound variables used in $bind_code with new row values
                $stmt->fetch();
                foreach($row as $key=>$value){
                    //Create array using the column/field name as the index
                    $_result[$key] = $value;
                }
                //Cast $_result to object and append to our final results
                $results[$i] = (object)$_result;
            }
        }
        $stmt->close(); 
        return $results;
    }
?>

＋add a note