(PHP 4 >= 4.0.2, PHP 5, PHP 7 < 7.2.0, PECL mcrypt >= 1.0.0)
mcrypt_module_open — Opens the module of the algorithm and the mode to be used
Diese Funktion wurde in PHP 7.1.0 als DEPRECATED (veraltet) markiert und wurde in PHP 7.2.0 ENTFERNT. Von der Verwendung dieser Funktion wird dringend abgeraten.
$algorithm,$algorithm_directory,$mode,$mode_directory
This function opens the module of the algorithm and the mode to be used.
The name of the algorithm is specified in algorithm, e.g. "twofish" or is
one of the MCRYPT_ciphername constants. The module is closed by calling
mcrypt_module_close().
algorithmEine der Konstanten von MCRYPT_ciphername oder der Name eines Algorithmus als Zeichenkette.
algorithm_directory
The algorithm_directory parameter is used to locate
the encryption module. When you supply a directory name, it is used. When
you set it to an empty string (""), the value set by the
mcrypt.algorithms_dir php.ini directive is used. When
it is not set, the default directory that is used is the one that was compiled
into libmcrypt (usually /usr/local/lib/libmcrypt).
modeEine der MCRYPT_MODE_modename-Konstanten oder eine der folgenden Zeichenketten: "ecb", "cbc", "cfb", "ofb", "nofb" oder "stream".
mode_directory
The mode_directory parameter is used to locate
the encryption module. When you supply a directory name, it is used. When
you set it to an empty string (""), the value set by the
mcrypt.modes_dir php.ini directive is used. When
it is not set, the default directory that is used is the one that was compiled-in
into libmcrypt (usually /usr/local/lib/libmcrypt).
Normally it returns an encryption descriptor, or false on error.
Beispiel #1 mcrypt_module_open() Examples
<?php
$td = mcrypt_module_open(MCRYPT_DES, '',
MCRYPT_MODE_ECB, '/usr/lib/mcrypt-modes');
$td = mcrypt_module_open('rijndael-256', '', 'ofb', '');
?>
The first line in the example above will try to open the DES cipher from
the default directory and the ECB mode from the directory
/usr/lib/mcrypt-modes. The second example uses
strings as name for the cipher and mode, this only works when the
extension is linked against libmcrypt 2.4.x or 2.5.x.
Beispiel #2 Using mcrypt_module_open() in encryption
<?php
/* Open the cipher */
$td = mcrypt_module_open('rijndael-256', '', 'ofb', '');
/* Create the IV and determine the keysize length, use MCRYPT_RAND
* on Windows instead */
$iv = mcrypt_create_iv(mcrypt_enc_get_iv_size($td), MCRYPT_DEV_RANDOM);
$ks = mcrypt_enc_get_key_size($td);
/* Create key (example only: MD5 is not a good hash algorithm for this) */
$key = substr(hash('md5', 'very secret key'), 0, $ks);
/* Intialize encryption */
mcrypt_generic_init($td, $key, $iv);
/* Encrypt data */
$encrypted = mcrypt_generic($td, 'This is very important data');
/* Terminate encryption handler */
mcrypt_generic_deinit($td);
/* Initialize encryption module for decryption */
mcrypt_generic_init($td, $key, $iv);
/* Decrypt encrypted string */
$decrypted = mdecrypt_generic($td, $encrypted);
/* Terminate decryption handle and close module */
mcrypt_generic_deinit($td);
mcrypt_module_close($td);
/* Show string */
echo trim($decrypted) . "\n";
?>
Doing a trim($decrypted) will remove the null padding that may occur as a result of decryption.
The problem is if you're encrypting something like a MSWord document which can commonly end with nulls. The result $decrypted will be smaller than the original cleartext - which will then fail to open in MSOffice.
To get around this, make sure you store the length of the original cleartext, and when you decrypt it, do:
$decrypted = substr(mdecrypt_generic($td, $encrypted), 0, $originalLength);for errors like
' mcrypt_module_open(): Could not open encryption module in '
Make sure you're using the right name. The page giving the list of ciphers is NOT the right way to say each cipher (shown here http://www.php.net/manual/en/mcrypt.ciphers.php).
In order to see what ones are supported, try phpinfo(); and look under mcrypt to find something like this
mcrypt support => enabled
mcrypt_filter support => enabled
Version => 2.5.8
Api No => 20021217
Supported ciphers => cast-128 gost rijndael-128 twofish arcfour cast-256 loki97 rijndael-192 saferplus wake blowfish-compat des rijndael-256
serpent xtea blowfish enigma rc2 tripledes
Supported modes => cbc cfb ctr ecb ncfb nofb ofb streamAlso it should be pointed that md5() and/or sha1() should not be used while forming your key for the mcrypt. This is so because hex encoding uses a set of only 16 characters [0-9a-f], which is equivalent to 4 bits, and thus halve the strength of your encryption: 4 x 32 = 128-bit.
I have re-wrote the example shown, so here is my suggestion to get real 256-bit encryption:
<?php
$key1 = "this is a secret key";
$key2 = "this is the second secret key";
$input = "Let us meet at 9 o'clock at the secret place.";
$length = strlen($input);
/* Open the cipher */
$td = mcrypt_module_open('rijndael-256', '', 'cbc', '');
/* Create the IV and determine the keysize length, use MCRYPT_RAND
* on Windows instead */
$iv = mcrypt_create_iv(mcrypt_enc_get_iv_size($td), MCRYPT_RAND);
$ks = mcrypt_enc_get_key_size($td);
/* Create key */
$key1 = md5($key1);
$key2 = md5($key2);
$key = substr($key1, 0, $ks/2) . substr(strtoupper($key2), (round(strlen($key2) / 2)), $ks/2);
$key = substr($key.$key1.$key2.strtoupper($key1),0,$ks);
/* Intialize encryption */
mcrypt_generic_init($td, $key, $iv);
/* Encrypt data */
$encrypted = mcrypt_generic($td, $input);
/* Terminate encryption handler */
mcrypt_generic_deinit($td);
/* Initialize encryption module for decryption */
mcrypt_generic_init($td, $key, $iv);
/* Decrypt encrypted string */
$decrypted = mdecrypt_generic($td, $encrypted);
/* Terminate decryption handle and close module */
mcrypt_generic_deinit($td);
mcrypt_module_close($td);
/* Show string */
echo "Text: ".substr($decrypted,0,$length) . "<br>";
echo "Encoded: ".$encrypted ."<br>";
echo "<br>key1: $key1 <br>key2: $key2<br>created key: $key";
?>about the previous comments on hex formatting and capitalization as a way to improve the key:
this would seem pretty obvious, but it is a choice to be limited to only hex characters ([0-9a-z]); you can get the original RAW output from md5() or sha1() and not the default readable hex formatting.
the result of a raw output will be 16 o 20 (depending on the hash function being used) series of chars in the range 0-255. way better than [0-9a-z] and even [0-9a-zA-Z].
16 or 20 is generally lower than the maximum key lenght ($ks in the example), but you can append two or more keys together:
<?php
$human_key1 = 'something very secret';
$human_key2 = 'something else very secret';
// 40 bytes binary key using two "human readable" keys and sha1.
$bigger_binary_key = sha1($human_key1, true) . sha1($human_key2, true);
// then just use it as you would (extract taken from the example)
$key = substr($bigger_binary_key, 0, $ks);
?>
... or you can automatically split one large "human key" into two or more parts, hash those parts with sha1 (raw output!) and merge them together again (in original order or rearrange, salt, transform them as you like) to get a binary key of 40, 60, 80 or more chars depending on the number of parts the secret key has been splitted =)Follow up to anonymous with Windows' mcrypt_module_open() errors:
<?php
$M = mcrypt_list_modes();
$A = mcrypt_list_algorithms();
foreach ($M as $m)
foreach ($A as $a) {
$t = @mcrypt_module_open($a,'',$m,'');
print "$m, $a = ";
print ($t)?"ok":"nope";
print "<br>";
}
?>
This will show that not all modes work with all algorithmns. Cygwin also has no 'libmcrypt.dll' and it too will work with only some combinations.
(First tries just happened to be one of the ones that did not work!)Keep in mind that the mcrypt functions do not implement padding like e.g. pkcs#5. This causes the problem with zero bytes at the end and the sting cannot be correctly decoded in other environments.
For an example how to add pkcs 5 padding, see ref.mcrypt.phpA slight improvement of dinamic's function to create a key:
I think the weak point is that capitals are always used in the same part of the string. The following code capitalizes random characters of the string, making the key less predictable:
<?php
$key = substr($key1, 0, $ks/2) . substr($key2, (round(strlen($key2) / 2)), $ks/2);
$key = substr($key.$key1.$key2.$key1,0,$ks);
$buffer = str_split($key);
$limit = count($buffer)-1;
srand((float)microtime() * 1000000);
$end = rand(0, $limit);
$a = 0;
// replace random chars with capitals
while ($a < $end) {
list($usec, $sec) = explode(' ', microtime());
$seed = ((float)$sec) + ((float) $usec * 100000);
mt_srand($seed);
$index = mt_rand(0,$limit);
$buffer[$index] = strtoupper($buffer[$index]);
$a++;
}
$key = join('', $buffer);
?>